Treads, Risers and Nosing
Pick red oak, white oak, hickory or maple. Every tread is 1 inch thick and 11 1/2 inches deep with a bull nose and riser.
Pick red oak, white oak, hickory or maple. Every tread is 1 inch thick and 11 1/2 inches deep with a bull nose and riser.
The estimator arrives with samples. Hold them beside the floor at the base of the stairs and the match is clear.
Wobbly steps are screwed tight first. Next the installer fits each new tread against the wall, glues it down and fastens it.
Our own crews, licensed, insured and NWFA certified, build every staircase, and we warrant the labor for one year.



Each step is $60, including the tread, riser, nosing, stain and labor.
Yes. Carpet, pad, strips and staples are removed, and the price is set on site.
Treads in solid oak can be hand sanded and refinished at $50 a step, while cracked or thin ones are replaced.
Yes. Oak risers in the tread stain give an all-wood stair, while paint gives contrast.
Usually. Wobbly steps are screwed down and every new tread is fitted, glued and fastened.
A return goes on the exposed end so the nose wraps the side and the tread looks complete.
Unfinished treads usually allow a start the following day and a finish within two. Prefinished treads must be ordered, which can take weeks.
Yes, a year on stair labor, by installers who are licensed, insured and NWFA certified.