Walkthrough Before We Start
Older farmhouses and capes in the Berkshire hills swell and shrink with the seasons, so our lead installer checks the subfloor for soft spots, measures every doorway and plans the board direction before ordering.
Older farmhouses and capes in the Berkshire hills swell and shrink with the seasons, so our lead installer checks the subfloor for soft spots, measures every doorway and plans the board direction before ordering.
The installers are Brazil Floors employees, not hired-in subcontractors, and each carries a license, insurance and NWFA certification into your home.
Morning one starts with a fresh tape measure. Cartons are counted and set in the rooms they belong to, and trim pieces wait by each opening before the first nail.
Our labor is covered for a full year, and the mill's own warranty stays with the wood, so the install and the planks each have protection.

Rows follow the longest wall, which cuts waste and calms a room with a lot of windows.

Short boards fitted in a zigzag give a dining room a woven, traditional feel.

Boards are mitered so the rows meet in crisp arrows that lead the eye down a long hallway.

Planks turned 45 degrees to the walls stretch a small room and make a snug cape feel wider.

Oak blocks with the grain alternating give a mudroom or sunporch a parquet look.

Pieces woven in an over-under pattern, often with a dark border, suit the older farmhouses near Farnams.



Our nail down labor rate is $2.25/Sq Ft, and we count the nails and underlayment inside it. Buying wood through us puts unfinished oak at $5.50/Sq Ft installed and prefinished at $6.00/Sq Ft.
No. We bring the free estimate and the samples to your house, and material rides from the Natick warehouse with delivery set for the next day.
Yes. Removal is about $1.00/Sq Ft, and the old material leaves on our truck. Moving furniture out and back is a flat $250.
Solid oak should stay upstairs. Engineered planks can float over a dry slab for $2.00/Sq Ft, with glued joints and no nails into the concrete.
Solid boards rest in the house for a few days, and we meter both the oak and the subfloor. That short wait prevents gaps and cupping.
We can get close with red or white oak and a stain mixed on site. We test it on a spare board so you approve before it goes down.
Labor is due when the crew arrives and work begins, and material is due as the boxes land. Sanding jobs split 50% at the start and 50% at the last coat.
A year on our labor, plus the manufacturer warranty on the planks. Our own licensed, insured, NWFA certified employees do the work.