Boards Matched to Yours
Most homes here have red oak strip in standard widths, and we carry it on the truck, then build the stain color in layers until the new boards disappear into the old.
Most homes here have red oak strip in standard widths, and we carry it on the truck, then build the stain color in layers until the new boards disappear into the old.
Book a free estimate. We meter the floor, look at the joists from the basement and show you which boards actually need to come out.
Squeaky halls and gaps near radiators and woodstoves are common in Ashby homes. We drive screws from above into the joists and close the seams with tinted filler.
Every repair carries a one year labor warranty, and each installer is licensed, insured and trained to NWFA standards.



Repairs start at $150 and are quoted on site by the number of strips and the cause. After the free visit you get a firm number in writing.
Yes. We dry the floor, track the meter readings over several days and replace only the boards that never flatten back out.
Not always. We check from the basement and from the room, dry everything and swap just the strips that stay damaged.
Red oak strip rides on the truck, and we build the stain in layers to match. Wide pine and other old boards are sourced and quoted after we see them.
Small screws go in from above into the framing, and the holes are filled with putty tinted to the floor.
Yes. The stove dries those boards out, so we fill the seams with a tinted filler that holds through the seasons.
Usually the same week. The drive from Natick to Ashby runs just past an hour, and a small patch usually gets cut, fitted and sealed before the crew leaves.
The patch is guaranteed for twelve months; if a replaced board moves or shows a gap, we come back and correct it.