Samples on Your Own Wood
Each sample is boxed in blue tape on sanded oak so you compare three or four colors side by side, near the window and in the darker end of the room.
Each sample is boxed in blue tape on sanded oak so you compare three or four colors side by side, near the window and in the darker end of the room.
Sanding scratches turn into dark lines under color, so a buffer with fine screens follows the big machine and the vacuum collects what is left.
Stain is wiped onto a small section and the excess pulled off before the next, so no lap lines show where one patch meets another.
The people applying color in Ashby are Brazil Floors employees with NWFA training and insurance, and their work is guaranteed for a year.



Hardwood floor staining is $2.00/Sq Ft, including stain samples on your own floor, hand applied color and a clear protective coat. If the floor also needs a full sanding and three coats of poly, that is the $2.50/Sq Ft refinishing.
Yes. Once the old finish is sanded off, bare oak takes brown, walnut or espresso without the orange tint showing through.
Dark walnut and natural oak lead, with espresso, soft gray and custom blends close behind.
Yes. Corners and treads get the edger and a hand scraper, then a stain chosen so the staircase ties the two floors together.
Overnight in most cases. Before the clear coat goes down, the crew comes back the following morning and confirms the stain is dry to the touch.
Many stay. A few families spend the curing night elsewhere, mostly to avoid the odor.
Usually the day after the measuring visit, and the same small crew handles the sanding, stain and clear coat.
Yes. Our own NWFA trained staff do the staining, and the labor carries a twelve month warranty.