Dustless Floor Refinishing
Sander dust is drawn through a hose into a sealed bag instead of onto the furniture. At the end we blow down walls and ceilings.
Sander dust is drawn through a hose into a sealed bag instead of onto the furniture. At the end we blow down walls and ceilings.
Under 1,500 Sq Ft, count 3 days unstained or 4 stained, with a spare day for damp weather. Stocking feet after one day, furniture after two.
A board cupped by a leaky window or dented by a dropped log is replaced from $150 and sanded flush with the room.
Labor is warranted for a full year by a licensed, insured, NWFA certified team. You pay half as sanding begins and the other half at the last coat.

A clear finish with no tint keeps oak pale and bright in a small cabin.

A mid brown hides boot marks and dog hair in a busy family house.

A cool gray brown cancels the orange cast of aging red oak in a sunny room.

A golden shade with a trace of red warmth suits a Victorian farmhouse.

Deep walnut shows every grain line under a long dining table.

Near black ebony looks sharp in a remodeled house, but dust and pet hair show up faster.



The flat rate is $2.50/Sq Ft, covering sanding, a coat of stain and three coats of poly. Oak that is merely dull may need only a $1.00/Sq Ft screen and recoat.
Yes. Once the old finish is sanded off, the oak takes brown, walnut or a gray toned stain, and we test swatches on your own boards.
Below 1,500 Sq Ft, count 3 days clear or 4 stained, plus a buffer day if the weather is damp. Walk on it in socks after a day and bring furniture back after two.
Outside or behind a closed door. Dogs can walk on the finish after 24 hours, and trimmed nails help.
Not with our setup. Dust runs to sealed sacks, and the crew vacuums and wipes everything before stain.
No. Leave a key with a neighbor or in a lockbox, as the crew needs access every day until the coats are down.
Fifty dollars a step with stain, hand sanded to blend with the upstairs floor. Risers are not in that figure.
No. Half is due when sanding starts and half when the poly is finished.