Treads, Risers and Nosing
Tread choices are red oak, white oak, hickory and maple, each 1 inch thick by 11 1/2 inches deep, with a bullnose edge and matching riser.
Tread choices are red oak, white oak, hickory and maple, each 1 inch thick by 11 1/2 inches deep, with a bullnose edge and matching riser.
Wood samples ride in our estimator's vehicle. Put one on the floor at the bottom step and you will see which species belongs there.
Wobbly treads are screwed down before anything else. Each new tread is then scribed to the wall, glued and fastened firmly.
Licensed, insured and NWFA certified installers build each staircase, and the labor is warrantied for a full year.



$60 a step. That covers the tread, riser, bullnose, stain to match your floor and installation.
Yes, including pad, tack strips and staples. The removal price is confirmed at your visit.
For solid oak, a hand sand and refinish is priced at $50 a step. Any tread that has cracked or worn thin is swapped for a new one.
Yes. Oak risers in the tread stain create an all-wood stair, and white paint adds a sharp contrast.
Usually. Loose steps are screwed down first, and new treads are fit, glued and fastened so they stay quiet.
A return is added at each exposed end so the rounded nose wraps around the tread.
Unfinished treads can be delivered the day after ordering from our Natick warehouse. The estimator sets the start date and explains the length of the job at your visit.
Yes, one year on labor, installed by licensed, insured, NWFA certified crews.