Walkthrough Before We Start
Colonials and capes from several eras rarely share one flat subfloor, so our lead installer checks levelness, doorway thresholds and the stairway in your North Andover house before opening a carton.
Colonials and capes from several eras rarely share one flat subfloor, so our lead installer checks levelness, doorway thresholds and the stairway in your North Andover house before opening a carton.
Every installer is a Brazil Floors employee with a license, insurance and an NWFA certificate, so nobody working in your house is a stranger sent by another contractor.
We start by measuring each room and staging cartons, trim pieces and reducers near the entry, which keeps the crew moving without pauses.
Our labor comes with a year of coverage, and the boards add the manufacturer's own warranty, so both the craft and the oak are protected.

Boards laid along the longest wall use the least wood and stretch a narrow hall visually.

Short boards turn right angles in a stepped zigzag, each piece cut by hand, which fits a formal dining room in an older house.

Boards cut at 45 degrees close each row into a crisp V, a good look for the open kitchens in newer houses.

A diagonal run carries the eye corner to corner, so a modest kitchen off Chickering Road feels roomier.

Oak squares rotate their grain direction in a parquet pattern, a classic floor for a family room.

Short pieces woven in an over-under basketweave, often ringed by a dark border, look right in a Federal-era house.



Our nail-down labor rate of $2.25/Sq Ft already holds the nails and the underlayment. Add the boards and the whole package reads $5.50/Sq Ft for unfinished or $6.00/Sq Ft for prefinished.
Yes. Tear-out of the carpet and pad is about $1.00/Sq Ft, then we check the subfloor, secure any soft spots and nail the hardwood onto solid plywood.
Engineered hardwood, floated on padding with glue in each joint. Labor for it is $2.00/Sq Ft.
We do. Vinyl plank labor is $2.00/Sq Ft and laminate labor is $1.99/Sq Ft, and vinyl is the better fit for a laundry room or a leaky basement.
Next day from our Natick warehouse. Your estimator confirms the installation date when you approve the material.
Each new tread costs $60, with the riser, nosing, stain and labor in the number. Stairs that are in good shape can be refinished at $50 per step.
Labor is paid when the crew arrives and material when the boxes reach the house. For sanding work, half is due at the beginning and half at the final coat.
Yes. We give one year on labor, the maker covers the boards, and every installer is licensed, insured and NWFA certified.