Treads, Risers and Nosing
Tread options are red oak, white oak, hickory and maple. Each tread is 1 inch thick and 11 1/2 inches deep, with a rounded front and a riser.
Tread options are red oak, white oak, hickory and maple. Each tread is 1 inch thick and 11 1/2 inches deep, with a rounded front and a riser.
The estimator brings tread samples. Lay them on your floor at the base of the stairs and the right wood becomes obvious.
Wobbly steps get screwed tight first. After that the installer fits each new tread against the wall, then glues and nails it.
Every staircase is built by a licensed, insured, NWFA certified crew, and our labor is warranted for twelve months.



It is $60 a step, with tread, riser, nosing, stain to match your floor and labor all in.
Yes. Carpet, pad, tack strips and staples all go, and the removal price is set at the home visit.
Sound oak treads are hand sanded and refinished for $50 per step. Cracked or thin ones are replaced.
Yes. Oak risers in the tread stain give an all-wood look, while white paint gives contrast.
In most cases. Loose steps are screwed down first, and each new tread is glued and fastened.
A return on each exposed end wraps the rounded nosing so every tread looks complete.
Unfinished treads often start the next day and wrap in two. Prefinished ones are special order and can take weeks.
Stair labor has a twelve month warranty, and our installers hold licenses, insurance and NWFA certification.