.svg){kind=logo}
Treads, Risers and Nosing
Pick from red oak, white oak, hickory or maple. Each oak tread is an inch thick and 11 1/2 inches from front to back, rounded on the leading edge, and a riser is paired with it.
/ Brazil Floors of Massachusetts
Stair Installation in Ashland, MA
New Stair Treads, Risers and Nosing
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Stair Install
Book online now to lock in your next-day appointment and $250 discount.
/ Stair Installers IN ASHLAND
Stair Installation Cost
New stairs in Ashland are $60 per step, and that figure does not move. That price holds the oak tread, the riser behind it, the rounded nosing, a stain color pulled from your floor and the labor to set each piece.
New Hardwood Stairs
For $60 you get a one inch thick oak tread, a fresh riser, a rounded front edge, the color you chose and our own installer setting it.
$60
/Step
What’s Included:
Tread, Riser and Nosing
Stained to Match on Site
Glued and Fastened Down
Laminate Stairs
Laminate up the stairs is $50 per step, each edge capped with a matching nose so the staircase reads as part of the floor.
$50
/Step
What’s Included:
Labor on Each Step
Matching Stair Nose
Flows Into Your Floor
Carpet to Hardwood Stairs
The carpet, the pad, the tack strips and every staple come off the steps, and we price that removal during the free in-home visit.
$60
/Step
What’s Included:
Carpet and Tack Strips Out
Removal Priced at Estimate
New Oak Treads and Risers
.svg)
.svg)
Tread Samples at Home
Tread samples ride in the estimator's truck. Set them against your floor at the foot of the stairs and the right wood and stain show themselves.
.svg)
Quiet, Solid Steps
Loose steps get screwed tight before anything new goes on. Then the installer scribes each tread to the stringers, glues it and fastens it so it stays silent.
.svg)
One Year Stair Warranty
Each staircase is built by NWFA certified installers with full insurance, and a year of labor coverage follows the job. If something shifts, we come back.
/ OUR SERVICES
Stair Installers in Ashland
We rebuild stairs in Pleasant Street colonials, Unionville two families, split levels below Megunko Hill and newer homes near Ashland Town Forest. The carpet is stripped, wobbly treads are fastened, and new risers and oak treads are fitted, usually in a single day. All staining happens in the house.
/ RED OAK, WHITE OAK, HICKORY AND MAPLE
Wood Stair Treads and Risers
A straight flight in a Unionville two family needs different pieces than a staircase that turns in a Pleasant Street colonial, so we go over the wood, risers and trim for your layout.
Red Oak Treads
In the older houses near the center of town, red oak in a warm stain blends with the original floors.
White Oak Treads
A bright colonial off Pleasant Street shows off white oak's pale, even grain.
Hickory and Maple Treads
Hickory takes the abuse of cleats and backpacks, and maple brightens a dark stairwell in a split level.
Painted or Wood Risers
Telechron era homeowners split between white painted risers and oak risers finished in the tread color.
Open Stairs and Return Ends
A staircase open on one side in a newer house by Ashland State Park gets mitered returns so the nose wraps the exposed end.
Landing Treads
On a Megunko Hill split level the top tread is planed flush to the upper floor, leaving no edge to trip over.
/ Floors, Repairs and Stain
Hardwood Floor Services in Ashland
Unionville and Pleasant Street homeowners also use us for water stained strips, resanding, and new hardwood, vinyl plank or laminate in the rooms that need it.
/ START YOUR PROJECT
Stairs Done in Days
Done with carpeted stairs in Unionville or out by Ashland State Park? Call 508-306-4190 and we come by with sample treads at no charge.
Get your Free In-Home EstimateWhat does one new hardwood step cost in Ashland?
$60 per step, and that number already includes the oak tread, riser, rounded nose, a stain to match your floor and the installation.
Will you pull the old carpet off the stairs?
Yes. Carpet, padding, tack strips and staples are all removed, with that cost quoted at the free estimate.
Can my existing treads be refinished instead?
Sound oak treads do not need replacing; a hand sand and new finish is $50 per step. Cracked or worn thin treads are replaced.
Can the risers be oak too?
Yes. Risers stained like the treads give a solid wood staircase; white painted risers give a sharp two tone look.
Will the squeaking stop?
In most cases, yes. Before anything new goes on, loose steps are fastened down, and each tread is scribed, glued and nailed so it never squeaks.
How is an open sided stair finished?
A return is mitered onto any open end so the bull nose turns the corner and the side of the tread is dressed.
How soon can you start and how long does it take?
Unfinished treads can go in the day after you call and the job wraps in about two days. Prefinished treads are special ordered and may take several weeks to arrive.
Is the stair work warrantied?
Yes. A year on the labor, from installers who are NWFA certified and insured.
/ ALSO SERVING
Stair Contractors Nearby
Hopkinton, Framingham, Southborough, Sherborn and Holliston are all a short drive, so new stair treads there carry the same per step price and often start the next day.
Saxonville stairs get new oak treads at $60 per step, riser, nosing, color and labor all in.
White oak treads lighten the dim stairwells of colonials near Hopkinton center.
Fayville owners trade worn stair carpet for oak that a damp cloth cleans in seconds.
Around Farm Pond in Sherborn, every squeaky step is fastened tight before the new oak is set.
Solid oak stairs in Mudville are hand sanded and recoated at $50 per step.
