Treads, Risers and Nosing
Four tread species are stocked for Sherborn jobs, namely red oak, white oak, hickory and maple. Treads are 1 inch thick and 11 1/2 inches deep with a rounded nose, and each pairs with a new riser.
Four tread species are stocked for Sherborn jobs, namely red oak, white oak, hickory and maple. Treads are 1 inch thick and 11 1/2 inches deep with a rounded nose, and each pairs with a new riser.
The estimator drives to your house with tread samples. Set them against the floor at the foot of the stairs and the right wood stands out.
Steps with any play are fastened tight before new work starts. Then every tread is scribed to the walls, glued and fixed in place.
Licensed, insured, NWFA certified installers on our payroll build your stairs, and the labor is warrantied for a year.



The price is $60 per step, covering the tread, riser, nosing, stain and the labor.
Yes, with pad, tack strips and staples, and we price that removal on site.
If the treads are sound oak, hand sanding and refinishing is $50 per step. Cracked or thin ones are replaced.
Yes. Oak risers in the tread stain give a full wood look, or white paint gives contrast.
In most cases. Loose steps are screwed down, and new treads are glued and fastened.
With a return on each exposed end, so the nose wraps around.
Labor when the crew starts and material when it is delivered, the next day from Natick.
A one-year labor warranty, backed by a crew with license, insurance and NWFA certification.