.svg){kind=logo}
Walkthrough Before We Start
Backpacks dropped at the door, a basketball dribbled in from the driveway and a Saturday of cleats. Red oak with a tough finish keeps pace with a Springfield family.
/ Brazil Floors of New Jersey
Hardwood Floor Installation in Springfield, NJ
$2.25/Sq Ft labor, nails and underlayment included. Written price before we start.
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Installation
Book online now to lock in your next-day appointment and $250 discount.
/ Hardwood Floor Crew IN SPRINGFIELD
Hardwood Floor Installation Cost
Hardwood installation in Springfield runs $2.25/Sq Ft for labor on a nail down job, and the nails and underlayment are already in that figure. Buy the boards from us and the total is $5.50/Sq Ft unfinished or $6.00/Sq Ft prefinished.
Nail Down Installation
Raw oak that we sand and finish on site is $5.50/Sq Ft installed, counting boards, nails and the underlayment between wood and subfloor.
$2.25
/Sq Ft
What’s Included:
Underlayment Included
Nails Supplied
Professional Installation
Nail and Glue Down
Boards finished at the mill cost $6.00/Sq Ft with installation, and the family can use the room the moment the last strip is fastened.
$2.50
/Sq Ft
What’s Included:
Nails Supplied
Glue Billed Separately
Professional Installation
Floating Floor
Slab or basement? Floating engineered hardwood is $2.00/Sq Ft for labor and goes down without a single nail into concrete.
$2.00
/Sq Ft
What’s Included:
Joint Glue Supplied
Underlayment Included
Professional Installation
.svg)
.svg)
Licensed, Insured Installation
Boards leave our warehouse in Long Branch, NJ, and next-day delivery from Long Branch gets them to your garage before the crew shows up.
.svg)
Remeasure and Material Count
At the free estimate we lay oak, engineered and prefinished samples across your own subfloor, so you judge the tone in the light your windows actually give.
.svg)
One Year Install Warranty
Labor is covered for one year, and the manufacturer stands behind the wood itself. Brazil Floors crews are payroll employees, not subcontractors.
/ FLOOR PATTERN DESIGNS
Hardwood Floor Patterns
A 1950s cape, a brick colonial and a split level each call for a different install. Here is how we pair the wood with the house.
Straight Lay Hardwood
Red oak nailed over a re-fastened subfloor ends the creak that older colonial hallways develop.
Herringbone Hardwood
A split level's lower den takes floating engineered boards, which sit over concrete without any nailing.
Chevron Hardwood
Tight driveways on cape streets are no obstacle, since our crew carries every bundle through the front door.
Diagonal Hardwood
Plywood subfloors in newer additions get nail and glue at $2.50/Sq Ft plus adhesive for a solid, quiet feel.
Checkerboard Parquet
Open living rooms near Meisel Avenue Park look best in a wide plank prefinished oak with a soft satin sheen.
Basket Weave Parquet
A mudroom door that sees muddy cleats all fall needs a hard finish and a tight board seam.
/ OUR SERVICES
Hardwood Installers in Springfield
We nail oak into split levels around Baltusrol, brick colonials off Mountain Avenue and capes along Route 22. Subfloors are checked and fastened, paper rolls out, strips are blind nailed, and the vacuum runs before we leave.
/ VINYL, REFINISHING AND STAIRS
Hardwood and More Flooring in Springfield
Brick colonials off Mountain Avenue and capes near Meisel Avenue Park are good candidates for new oak, and the crew also handles vinyl, laminate, refinishing, staining, board repair and stairs.
/ START YOUR PROJECT
Hardwood Floor Installation FAQ
Planning new oak for a cape near Meisel Avenue Park or a colonial off Mountain Avenue? Ring 732-851-1059 and we schedule a free estimate where oak samples come to your doorstep.
Get your Free In-Home EstimateWhat does hardwood installation cost in Springfield?
Labor runs $2.25/Sq Ft nailed, $2.50/Sq Ft glued and nailed with adhesive extra, or $2.00/Sq Ft for a floated engineered floor. Supplying the oak ourselves brings the all-in price to $5.50/Sq Ft raw or $6.00/Sq Ft prefinished.
My split level has a sloping hallway. Can new boards go in?
Yes, once we level the low spots and fasten the plywood. We measure the dip at the estimate and tell you how much prep to expect.
Can hardwood go over radiant heat?
Engineered boards are the safe choice over in-floor heat, installed at $2.00/Sq Ft of labor. We confirm the system temperature before ordering.
Do you take out my old floor?
Tear-out runs about $1.00/Sq Ft and the debris leaves with us. Loose spots in the subfloor are secured before the first row.
Does booking online save money?
Absolutely: reserve your estimate on the website and $250 is deducted. Emptying the rooms ahead of the crew is a flat $250 if you would rather not lift a thing.
How many days will the job take?
Plan on one to two days for a pair of prefinished rooms. Site finished raw oak stretches to about a week because every coat has to cure.
Where does the wood come from?
It ships from our warehouse in Long Branch, NJ, and next-day delivery from Long Branch follows your order.
Who installs and what is warranted?
Our own employees do the work, and labor is guaranteed for one year. The wood carries the manufacturer's warranty on top of that.
/ ALSO SERVING
Hardwood Floors in Nearby Towns
Our oak crews also work in Millburn, Union, Kenilworth, Mountainside and Summit, all at one nail down labor rate.
Short Hills colonials near the train station pick wide plank oak at $6.00/Sq Ft installed.
Union Center brick homes take nail down oak at $2.25/Sq Ft of labor.
Kenilworth cape cods with old fir get new strips laid over a leveled base.
Mountainside homes along the Watchung Reservation edge ask for natural red oak.
Summit's tall Tudors choose engineered boards floated at $2.00/Sq Ft of labor.
