.svg){kind=logo}
Walkthrough Before We Start
Hockey bags in the front hall, muddy cleats from a Watchung Reservation hike and a lab chasing a tennis ball. A hard finished oak floor takes the abuse.
/ Brazil Floors of New Jersey
Hardwood Floor Installation in Mountainside, NJ
$2.25/Sq Ft labor, nails and underlayment included. Written price before we start.
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Installation
Book online now to lock in your next-day appointment and $250 discount.
/ Hardwood Floor Installers IN MOUNTAINSIDE
Hardwood Floor Installation Cost
Nail down oak in Mountainside is $2.25/Sq Ft for labor, and the nails and underlayment are already counted. Buy the boards from us and the installed total is $5.50/Sq Ft unfinished or $6.00/Sq Ft prefinished.
Nail Down Installation
Unfinished oak that is sanded and coated inside the house runs $5.50/Sq Ft with installation, nails and underlayment all included.
$2.25
/Sq Ft
What’s Included:
Underlayment Included
Nails Supplied
Professional Installation
Nail and Glue Down
Prefinished planks come factory sealed and cost $6.00/Sq Ft installed, so the room is usable the moment the final strip is set.
$2.50
/Sq Ft
What’s Included:
Nails Supplied
Glue Billed Separately
Professional Installation
Floating Floor
Over concrete or a lower level, floating engineered hardwood is $2.00/Sq Ft of labor and goes in without nails or glue.
$2.00
/Sq Ft
What’s Included:
Joint Glue Supplied
Underlayment Included
Professional Installation
.svg)
.svg)
Licensed, Insured Installation
Your order ships from our warehouse in Long Branch, NJ and arrives by next-day delivery from Long Branch, so the install does not stall waiting on a pallet.
.svg)
Remeasure and Material Count
Our estimator walks in with oak, maple and engineered boards, then sets them on your own subfloor next to the windows so the color is judged where it will live.
.svg)
One Year Install Warranty
Labor is covered for one year, and the boards keep the maker warranty. Everyone on site is on our payroll and none of the work is subcontracted.
/ FLOOR PATTERN DESIGNS
Hardwood Floor Patterns
A hillside split level, a brick colonial and a ranch near Route 22 call for three different installs. Here is how the wood gets matched to each home.
Straight Lay Hardwood
Red oak strips nailed over a leveled plywood floor give a split level a solid, quiet walk.
Herringbone Hardwood
Wide engineered planks float across a finished lower level, where a slab runs cooler than the floors upstairs.
Chevron Hardwood
Steep driveways on the hills here mean boxes come in by hand, and our crew carries every bundle through the door.
Diagonal Hardwood
On plywood over joists, nail and glue at $2.50/Sq Ft plus adhesive keeps boards tight in a high traffic den.
Checkerboard Parquet
A pale European style oak brightens a colonial living room that gets little afternoon sun.
Basket Weave Parquet
Slush and road salt tracked in from Route 22 winters call for a tough finish on foyer boards.
/ OUR SERVICES
Hardwood Installers in Mountainside
Mountainside is mostly postwar capes, colonials and split levels, and their subfloors rarely sit perfectly flat. We scribe the low spots, roll out paper, blind nail every course and finish with a full vacuum.
/ VINYL, REFINISHING AND STAIRS
Flooring Services in Mountainside
Hillside colonials and split levels around Constitution Plaza take solid hardwood well, and the same team handles vinyl, laminate, refinishing, staining, board repair and stairs.
/ START YOUR PROJECT
Hardwood Floor Installation FAQ
Planning oak for a split level or colonial in Mountainside? Dial 732-851-1059 and an estimator comes to your Mountainside kitchen table with samples, at no charge.
Get your Free In-Home EstimateWhat should I budget for hardwood installation in Mountainside?
Labor runs $2.25/Sq Ft for nail down, $2.50/Sq Ft plus adhesive for nail and glue, and $2.00/Sq Ft for a floated engineered floor. Add our lumber and a finished job lands at $5.50/Sq Ft for raw oak or $6.00/Sq Ft for prefinished.
My split level has a sloped hall floor. Will new oak still work?
Yes, once the low areas are built up and loose plywood is fastened. We map the slope at the estimate and tell you what leveling it needs.
Can hardwood go on the lower level of my house?
Floating engineered boards are the safe pick over a slab, and labor is $2.00/Sq Ft. We test the concrete for moisture before ordering anything.
Do you pull up the old carpet or flooring?
We do for about $1.00/Sq Ft and take the debris with us. Squeaky spots are screwed down before the first new board is set.
Does booking online save anything?
Schedule the Mountainside estimate on our website and the first $250 of the bill disappears. Clearing furniture from the room is a flat $250 when you hand that to us.
How many days will my living room take?
Two prefinished rooms usually wrap in a day or two. If raw oak is sanded and coated inside your house, plan on most of a week.
Where does the wood come from?
It leaves our warehouse in Long Branch, NJ and reaches you by next-day delivery from Long Branch.
Who lays the floor, and what stands behind it?
Our licensed, insured staff and nobody hired out. A twelve month labor warranty sits on top of the maker coverage on the boards.
/ ALSO SERVING
Hardwood Floors in Nearby Towns
The same hardwood crew also lays floors in Westfield, Springfield, Berkeley Heights, Summit and Scotch Plains under one labor rate.
Westfield Tudors and center hall colonials take nail down oak at $2.25/Sq Ft of labor.
Springfield capes along Route 22 choose prefinished boards at $6.00/Sq Ft installed.
Hillside homes in Berkeley Heights pick wide plank oak for open main floors.
Older Summit houses near the train line get new oak over repaired subfloors.
Scotch Plains ranches go with floated engineered planks at $2.00/Sq Ft of labor.
