.svg){kind=logo}
Walkthrough Before We Start
Piano lessons in the living room, a teenager's cleats by the mudroom door and a lab mix shaking off the rain. A hard factory or site finish on red oak takes that routine without complaint.
/ Brazil Floors of New Jersey
Hardwood Floor Installation in Millburn, NJ
$2.25/Sq Ft labor, nails and underlayment included. Written price before we start.
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Installation
Book online now to lock in your next-day appointment and $250 discount.
/ Short Hills Oak Flooring Crew IN MILLBURN
Hardwood Floor Installation Cost
Laying hardwood in Millburn begins at $2.25/Sq Ft for nail down labor, and the nails and underlayment are already counted. Bring in the boards through us and the installed figure is $5.50/Sq Ft for unfinished or $6.00/Sq Ft for prefinished.
Nail Down Installation
Unfinished strips we nail, sand and coat on site come to $5.50/Sq Ft complete, boards, nails and underlayment all inside that number.
$2.25
/Sq Ft
What’s Included:
Underlayment Included
Nails Supplied
Professional Installation
Nail and Glue Down
Sealed prefinished planks are $6.00/Sq Ft installed, and a family can use the room once the last course is fastened.
$2.50
/Sq Ft
What’s Included:
Nails Supplied
Glue Billed Separately
Professional Installation
Floating Floor
Floating engineered hardwood over a slab or a finished lower level is $2.00/Sq Ft for labor alone.
$2.00
/Sq Ft
What’s Included:
Joint Glue Supplied
Underlayment Included
Professional Installation
.svg)
.svg)
Licensed, Insured Installation
Orders move out of our warehouse in Long Branch, NJ, and next-day delivery from Long Branch puts the cartons in your garage before the crew arrives.
.svg)
Remeasure and Material Count
Our estimator walks in with oak, maple and engineered samples and lays them against your trim and window light, since Millburn rooms with leaded glass and deep porches read color differently.
.svg)
One Year Install Warranty
Labor on every install is covered for one year, while the lumber keeps its factory warranty. The people on your floor are Brazil Floors employees, not hired-in subcontractors.
/ FLOOR PATTERN DESIGNS
Hardwood Floor Patterns
A stone Tudor, a mid century split and a townhouse off the train line never share a subfloor. These notes explain which wood and method belong to each.
Straight Lay Hardwood
Narrow oak laid over a firm plywood deck keeps the hallways of older Tudors from flexing.
Herringbone Hardwood
Townhouses close to the station take floated engineered planks over a pad that dampens footfalls.
Chevron Hardwood
Wyoming section colonials often have tight front halls, so our people carry each bundle in by hand and protect the trim.
Diagonal Hardwood
Plywood subfloors under a split level near Taylor Park do well with nail and glue at $2.50/Sq Ft plus adhesive.
Checkerboard Parquet
Wide plank white oak with a satin sealer suits the big sunrooms found in Short Hills.
Basket Weave Parquet
Mudroom entries take scuffs from cleats and boots, so a tough finish earns its keep right inside the door.
/ OUR SERVICES
Hardwood Flooring Pros in Millburn
Our nailers work in Short Hills Tudors, Wyoming section colonials and capes within walking distance of Millburn Avenue. Subfloors get checked and fastened, felt rolls out, and strips are blind nailed row by row before the final vacuum pass.
/ VINYL, REFINISHING AND STAIRS
Flooring Services in Millburn
Tudors in Short Hills and colonials near Taylor Park carry real oak well, and the crew can follow up with vinyl, laminate, sanding, staining, board repair or stair treads.
/ START YOUR PROJECT
Hardwood Floor Installation FAQ
Planning oak for a Short Hills Tudor or a colonial near Taylor Park? Phone or text 732-851-1059, and an estimator arrives with oak samples and a no cost quote.
Get your Free In-Home EstimateHow much does hardwood flooring cost for a Short Hills or Millburn home?
Nail down labor runs $2.25/Sq Ft, nail and glue is $2.50 plus adhesive, and a floated engineered install is $2.00. If we supply the wood, unfinished totals $5.50/Sq Ft and prefinished totals $6.00.
Our Tudor has old plank subfloors that creak. Is new hardwood still possible?
Yes. We fasten loose boards, flatten dips and lay paper before any strip goes down, so the creaks are handled first.
Can engineered hardwood go in a townhouse near the station?
It is the usual pick for stacked units, floated over a pad for $2.00/Sq Ft of labor. Send us your association's sound rules and the underlayment is chosen to match.
What happens to my old flooring?
We pull it and haul it off for about $1.00/Sq Ft. Anything soft or noisy underneath is repaired before new oak arrives.
Does it cost less if I book the estimate online?
It does, by $250 off the job. Our crew will also shift the furniture for a flat $250 if you prefer.
How many days should I plan for?
Prefinished rooms usually take a day or two. Raw oak that is sanded and sealed in place takes about a week.
Where does the wood come from?
It leaves our warehouse in Long Branch, NJ. Next-day delivery from Long Branch follows once your order is placed.
Who will be in my home and what is guaranteed?
Brazil Floors employees only, all licensed, insured and NWFA certified. You receive one year on labor and the maker's warranty on the lumber.
/ ALSO SERVING
Hardwood Floors in Nearby Towns
Maplewood, Springfield (Union), Livingston, Chatham Township and Summit get the same hardwood crew and the same published labor rates.
Maplewood Victorians near the village prefer solid oak nailed down at $2.25/Sq Ft.
Springfield capes along Morris Avenue pair well with prefinished boards at $6.00/Sq Ft.
Livingston colonials with large family rooms often choose wide plank oak.
Chatham Township houses on wooded lots take engineered planks floated at $2.00/Sq Ft of labor.
Summit homes near the train station get nailed oak with a stain matched to original rooms.
