Samples on Your Own Wood
Each sample is boxed in with blue tape on sanded oak, so you compare shades side by side in sun and in shadow.
Each sample is boxed in with blue tape on sanded oak, so you compare shades side by side in sun and in shadow.
Sanding scratches show as dark streaks once color goes on, so a buffer with fine screens follows the sander and a vacuum finishes the surface.
Stain is wiped over a small area and the excess lifted before the next, so no overlap lines show.
Our own payroll staff do every stain job, trained to NWFA standards, insured, and backed by a one-year labor warranty.



Staining is $2.00/Sq Ft, with stain samples on your own floor, hand-applied color and a clear protective coat. The complete sand, stain and three-coat refinishing service is the $2.50/Sq Ft one.
Yes. Once the old amber finish is sanded away, bare oak accepts brown, walnut or mahogany cleanly.
We mix stains on site and test them on offcuts until the new boards match the old. You approve the sample before any stain goes on.
Not always, because oak changes every shade. That is why we apply samples on your own floor.
Socks after about a day and furniture after two, depending on the coat and the weather.
Yes. Treads are sanded and stained to match, and stair refinishing is $50 per step.
Our own employees do it, with no subcontractors. Every one is licensed, insured and NWFA certified.
We split the sanding bill, half when we begin and half after the final coat. Booking the estimate online takes $250 off.