Boards Matched to Yours
For Goldens Bridge patches, compare species, width and thickness with existing floor. Age and grain can keep new wood from matching exactly.
For Goldens Bridge patches, compare species, width and thickness with existing floor. Age and grain can keep new wood from matching exactly.
A Cross River inspection must locate your damage and assess its supporting base. Address the cause of moisture problems before repairs.
A Vista squeak needs its source assessed before fastening. Seasonal movement and loose boards need different remedies, even in one room.
Keep the Lewisboro repair scope and care directions. Review the workmanship coverage and limits affecting the remaining floor.



Often a local repair can be considered, but the joints, supporting surface and neighboring boards need inspection. Suitable replacement stock and an agreed finishing boundary are also necessary.
An exact visual match cannot be promised. Species, grain, board age and prior coatings can remain visible even when the replacement fits correctly and the finish is blended.
No. Deep discoloration may exceed the amount of wood that can safely be removed. Evaluate replacement where needed instead of sanding repeatedly in pursuit of the mark.
No. First identify the moving joint or component. The noise may originate below the visible boards, so inspection should establish whether fastening, support work or replacement is needed.
First assess whether the gaps change with seasonal conditions. A rigid filler may not suit a moving joint, so the cause and expected movement should guide the repair.
Repair planning follows correction of the leak or other moisture cause and an assessment of the affected construction. Remaining damage and product requirements determine readiness; elapsed time alone is not enough.
Not always, but the finish boundary must be discussed. The existing coating and continuity of the wood can make a wider treatment preferable to a visible isolated patch.
Provide the complete address, wider room photographs and close views of the problem. Explain when it appeared and whether a spill, leak, move or other event preceded it.