Dustless Floor Refinishing
The sanders are hooked to a vacuum that pulls most dust into a sealed bag, and the crew vacuums again before stain, so the rest of the home stays cleaner.
The sanders are hooked to a vacuum that pulls most dust into a sealed bag, and the crew vacuums again before stain, so the rest of the home stays cleaner.
Furniture moving is a flat $250 if you want the help. Samples are brushed on your actual floor, and the estimate lays out the schedule.
A board ruined by a radiator leak or a pet gets replaced, from $150, then sanded flush with everything around it.
A one year labor warranty covers the job, performed by licensed, insured, NWFA certified staff. Half is due at sanding start, and half at the last coat.

Clear finish without stain keeps oak bright in a small apartment.

A walnut-brown hides boot marks and pet fur in a busy hallway.

A smoky gray-brown cuts the orange glow of older red oak.

Honey with a hint of red warms a period home with dark woodwork.

Rich walnut brings out grain lines under a large dining table.

A near-black finish looks sharp in a modern remodel, but shows dust sooner.



The price per foot is $2.50, which pays for sanding, stain and a trio of poly coats. A sound floor that is only dull may need just a $1.00/Sq Ft screen and recoat.
Usually. Once sanding clears the old finish, a cooler stain pulls the red back out of the wood. We test on your own boards before you decide.
It depends on square footage and whether stain is added. At the estimate we map out the schedule and tell you when you can walk on the floor.
Keep them in another room or outside while the crew works, and let the finish cure before paws return. Trimmed nails protect the new coat.
Machines collect the dust as they go, and the crew vacuums before stain. Expect far less than the old days of dust over everything.
No. A key with a neighbor or in a lockbox works, since the crew needs access until the final coat is on.
Hand sanding with stain is $50 per step. Risers are not part of that price.
No. You pay half after sanding starts and half at the final coat, and the free estimate has no charge.