Treads, Risers and Nosing
Red oak, white oak, hickory and maple are the choices. Every tread is 1 inch thick and 11 1/2 inches deep with a bull nose, plus a riser.
Red oak, white oak, hickory and maple are the choices. Every tread is 1 inch thick and 11 1/2 inches deep with a bull nose, plus a riser.
Wood samples ride in the estimator's truck. Hold one next to your floor at the foot of the stairs and you will see which one belongs.
Shaky treads are screwed tight first. Then the installer scribes each new tread to the wall, glues it down and fastens it.
Employees who are licensed, insured and NWFA certified build the stairs, and our labor has a one year warranty.



A step is $60, with tread, riser, bull nose, matching stain and labor.
Yes. Carpet, pad, tack strips and staples all come out, and we quote that cost on site.
If they are good oak, we hand sand and refinish them at $50 per step. Cracked ones are replaced.
No. Oak risers in the tread stain look all wood, and painted ones add contrast.
Mostly yes, since loose steps are secured and new treads are glued and fastened.
A return goes on each exposed end so the nose runs around the side.
We stain in the house and the estimator explains timing at the free visit.
Yes. A year covers our labor, and the crew holds licenses, insurance and NWFA certification.