Treads, Risers and Nosing
Tread choices are red oak, white oak, hickory and maple, all 1 inch thick and 11 1/2 inches deep, with a bull nose and a riser.
Tread choices are red oak, white oak, hickory and maple, all 1 inch thick and 11 1/2 inches deep, with a bull nose and a riser.
The estimator carries tread samples. Hold them against the floor at the foot of the stairs and the right wood is clear.
We tighten any loose step first. Then each new tread is scribed to the wall, glued and fastened so it will not creak.
A licensed, insured and NWFA certified crew builds the stairs, and labor is warrantied for a year.



$60 per step, with tread, riser, bull nose, matching stain and labor included.
Yes. We pull the carpet, pad, tack strips and staples, and quote removal at the estimate.
Treads of solid oak are hand sanded and refinished at $50 per step in Rowe. Cracked or thin treads are replaced.
Yes. Oak risers in the tread stain give an all wood look, and white paint gives contrast.
Usually. Any loose step is screwed tight, then every new tread is glued and fastened in place.
An exposed end gets a return piece, so the nosing turns the corner and the tread looks finished.
The estimator gives you a schedule after seeing the flight. Unfinished treads can be stained at the house.
Yes, one year on labor. Installers on the Rowe stair crew carry a license and insurance and hold NWFA certification.