.svg){kind=logo}
Treads, Risers and Nosing
Four woods are on offer for treads in Phillipston: red oak, white oak, hickory and maple. Each is 1 inch thick and 11 1/2 inches deep with a rounded nose, set over a riser.
/ Brazil Floors of Massachusetts
Stair Installation in Phillipston, MA
New Stair Treads, Risers and Nosing
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Stair Install
Book online now to lock in your next-day appointment and $250 discount.
/ Stair Installers IN PHILLIPSTON
Stair Installation Cost
New stairs in Phillipston are $60 per step, and the figure stays put. It covers the hardwood tread, riser, nosing, a stain matched to your floor and the installers.
New Hardwood Stairs
A $60 step is a 1 inch hardwood tread, a new riser, the nosing, stain in your shade and our crew's labor.
$60
/Step
What’s Included:
Tread, Riser and Nosing
Stained to Match on Site
Glued and Fastened Down
Laminate Stairs
Laminate on stairs is $50 per step in labor, with nosing in a matching color so the flight looks like part of the floor.
$50
/Step
What’s Included:
Labor on Each Step
Matching Stair Nose
Flows Into Your Floor
Carpet to Hardwood Stairs
Old stair carpet comes up with its pad, tack strips and staples, and the removal cost is settled with you at the free home visit.
$60
/Step
What’s Included:
Carpet and Tack Strips Out
Removal Priced at Estimate
New Oak Treads and Risers
.svg)
.svg)
Tread Samples at Home
The estimator drives out with tread samples. Hold them against the floor at the bottom of the stairs and the right wood becomes clear.
.svg)
Quiet, Solid Steps
Loose treads are screwed down before anything else. Each new tread is scribed to the wall, glued and fastened so it stays quiet.
.svg)
One Year Stair Warranty
Licensed, insured and NWFA certified crews build every flight, and the labor is warranted for a year. Any slip we caused, we fix.
/ OUR SERVICES
Stair Installers in Phillipston
We rebuild stairs in farmhouses on Searles Hill, capes by Phillipston Center and older homes toward Elliott Laurel. We strip the carpet, secure any wobbling step and fit new hardwood treads with fresh risers. The staining happens inside your house.
/ RED OAK, WHITE OAK, HICKORY AND MAPLE
Wood Stair Treads and Risers
A narrow farmhouse staircase and a wide open flight in a newer home need different treatment, so we help you choose the wood, risers and trim.
Red Oak Treads
Red oak in a warm stain suits the older floors in Searles Hill houses.
White Oak Treads
White oak has a light, even grain that brightens a stairwell with little daylight.
Hickory and Maple Treads
Hickory takes hard daily traffic, and maple lifts a dark stair.
Painted or Wood Risers
Painted white risers or stained oak ones are both common choices in town.
Open Stairs and Return Ends
An open stair gets return ends so the rounded nose wraps the side of each tread.
Landing Treads
Up top, the last tread is cut so it lands even with the second floor.
/ Floors, Repairs and Stain
Hardwood Floor Services in Phillipston
Homes near Phillipston Center call us for stairs and also for new hardwood, vinyl plank or laminate, refinishing, staining and board repair.
/ START YOUR PROJECT
Stairs Done in Days
Need new stairs near the Free Public Library or out by Searles Hill? Dial or text 508-306-4190 and an estimator carries real tread samples to your house, free of charge.
Get your Free In-Home EstimateWhat does one new hardwood step cost in Phillipston?
$60 per step covers the tread, riser, nosing, stain matched to your floor and the labor.
Do you remove stair carpet?
Yes. The carpet, pad, tack strips and staples all come out, and the removal price is confirmed at the estimate.
Can my existing treads be refinished?
Sturdy oak treads can be hand sanded and refinished at $50 per step. Anything cracked or worn thin gets swapped for a new tread.
Can the risers be oak too?
Yes. Oak risers in the tread stain give a full wood look, and painted white ones create contrast.
Will new treads stop the creaking?
On most stairs, yes. Loose parts are screwed down first, and each tread is glued and fastened so it stays quiet.
How is an open-sided stair finished?
We fit a return on each exposed end, so the nosing wraps around and every step looks complete.
How long does a stair job take?
That depends on the number of steps and whether the treads are unfinished or prefinished. Your estimator lays out the sequence at the visit.
Is there a warranty?
Stair labor carries a one year warranty, and the crews are licensed, insured and NWFA certified.
/ ALSO SERVING
Stair Contractors Nearby
We build and renew stairs for Templeton, Petersham, Athol, Gardner and Hubbardston homes too, with materials delivered the next day.
A new hardwood step in Templeton is $60 with riser, nose, stain and labor in the price.
Petersham stairs gain light and warmth from white oak treads.
Athol houses swap worn stair carpet for oak that wipes clean.
Gardner stair work starts by tightening every loose step, then fitting fresh oak.
Hubbardston stairs in sound oak are hand refinished for $50 a step.
