Treads, Risers and Nosing
Tread choices are red oak, white oak, hickory and maple, each 1 inch thick by 11 1/2 inches deep with a bull nose and its own riser.
Tread choices are red oak, white oak, hickory and maple, each 1 inch thick by 11 1/2 inches deep with a bull nose and its own riser.
Our estimator carries tread samples. Hold one up against the main-floor boards and the best match shows itself.
Any wobbling step is screwed tight before the new tread goes on. The installer then scribes the tread to the wall, glues it and fastens it.
Stair crews are licensed, insured and NWFA certified, and our labor is warranted for a year. A loose tread is corrected without argument.



One step is $60, which includes the tread, riser, nosing, stain and labor.
Yes. Carpet, pad, strips and staples are removed, and the cost is set on site. Tear-out of old flooring generally is about $1.00/Sq Ft.
If they are healthy oak, refinishing by hand is $50 per step. Treads that have cracked or worn thin should be replaced.
No. Risers can be oak stained like the treads for a uniform wood look, or painted white for contrast.
For most staircases they do, since loose steps are fastened first and each new tread is glued and secured.
A return is added at each exposed end, so the nose continues around and the step looks complete.
Labor when the crew begins and material when it is delivered, which is the day after ordering from Natick.
Yes, one year on labor. Each crew holds licenses, insurance and NWFA certification.