Treads, Risers and Nosing
We offer treads in red oak, white oak, hickory and maple. Each is 1 inch thick, 11 1/2 inches deep and rounded at the nose, and a riser comes along.
We offer treads in red oak, white oak, hickory and maple. Each is 1 inch thick, 11 1/2 inches deep and rounded at the nose, and a riser comes along.
The estimator drives out with tread samples. Place them against the floor at the foot of the stairs and the right wood becomes plain.
Wobbly steps are screwed down first. Then the installer scribes each tread to the stringer, glues it and fastens it for a quiet climb.
Licensed, insured, NWFA certified installers build every flight, and labor is warranted for a year. If a tread shifts, we come back to correct it.



It is $60 per tread, covering the tread, riser, nosing, stain and the installation labor.
We do. Carpet, pad, tack strips and staples all come off, and removal is priced on site, with tear-out of old flooring about $1.00/Sq Ft.
Where the oak is still healthy, we refinish each tread by hand at $50 per step; a cracked or thinned tread is swapped for a new one.
Yes. Stained oak risers give a full wood look, and painted white risers give a crisp contrast.
Usually. Loose steps are secured first, then each new tread is scribed, glued and fastened so it stays quiet.
A return is added on each exposed end, so the nosing wraps the side and the step looks finished.
Labor is paid when the crew starts and material when it is delivered, which happens the day after ordering from Natick.
Yes. Stair labor is warranted for a year, and the crews are licensed, insured and NWFA certified.