Treads, Risers and Nosing
Four tread species are on offer in Colchester: red oak, white oak, hickory and maple. Every tread measures 1 inch thick by 11 1/2 inches deep, with a bull nose and a matching riser.
Four tread species are on offer in Colchester: red oak, white oak, hickory and maple. Every tread measures 1 inch thick by 11 1/2 inches deep, with a bull nose and a matching riser.
Tread samples ride along in the estimator's truck to Colchester. Set them against your floor at the foot of the stairs and the right species shows itself.
Loose steps are screwed down to the stringers before anything new goes on. Each tread is then scribed to the wall, glued and fastened tight.
A licensed, insured and NWFA certified crew builds every Colchester staircase, and the labor is warrantied for one full year.



Each step is $60, covering the hardwood tread, riser, bull nose, matching stain and labor. The number does not change by species.
Yes. We remove carpet, pad, tack strips and staples, and the removal cost is set at the free estimate.
If the oak is solid, hand sanding and refinishing costs $50 a step. Cracked or badly worn treads are better replaced at $60.
Yes. Oak risers in your tread stain give an all-wood look, while white painted risers give crisp contrast.
Almost always. Loose steps are screwed to the framing first, and each new tread is glued and fastened so nothing moves.
We add a return to each exposed end so the rounded nose wraps the side. The tread reads as one finished piece.
Unfinished tread jobs often begin the day after the estimate and most Colchester stairs take a day or two. Prefinished treads have to be ordered in and add a few weeks to the wait.
Yes, one year on labor. The stair crew is licensed, insured and NWFA certified, and on our payroll.