Treads, Risers and Nosing
Tread woods are red oak, white oak, hickory and maple, each 1 inch thick and 11 1/2 inches deep with a bull nose and a riser.
Tread woods are red oak, white oak, hickory and maple, each 1 inch thick and 11 1/2 inches deep with a bull nose and a riser.
The estimator's truck carries tread samples. Hold them against the floor at the foot of the stairs to choose the wood.
Wobbly steps are screwed down first. Then each tread is scribed to the wall, glued and fastened by the installer.
Licensed, insured, NWFA certified crews build every flight, and the labor has a one year warranty.



$60 per step, with tread, riser, bull nose, stain and labor all included.
Yes. Carpet, pad, tack strips and staples come out, and removal is priced on site.
Treads of solid oak are hand sanded and refinished at $50 per step. Cracked or thin ones are replaced.
Yes. Oak risers in the tread stain make an all wood stair, and painted white risers add contrast.
For most stairs they do. Loose steps are screwed down before each tread is fitted, glued and fastened.
A return goes on the exposed end and wraps the nose, so every tread looks complete.
With unfinished wood, work often starts the next day and wraps in two. Prefinished treads ship slower.
Yes, for a year on labor, by a crew with licenses, insurance and NWFA certification.