Treads, Risers and Nosing
Choose among maple, hickory, white oak and red oak. Every tread measures one inch thick by 11.5 inches deep, and a brand new riser goes in behind every single step.
Choose among maple, hickory, white oak and red oak. Every tread measures one inch thick by 11.5 inches deep, and a brand new riser goes in behind every single step.
Tread samples ride in the estimator's truck, so you can hold different species against your bottom step and settle on a stain while standing in your own front hall at dusk.
First, any rocking step is screwed into the stringers. Our carpenter then sizes every new tread snug between the walls, glues and fastens it, and step four goes quiet.
Our NWFA certified carpenters guarantee stair work for twelve months. Should any step loosen during that year, we send someone back to Bolton to tighten it.



Each step costs $60 installed. That pays for the tread, a riser, the nosing, stain and our carpenter's time. If a bookcase or dresser blocks the way, we move it for a flat $250.
If the oak under your runner is solid, absolutely. We hand sand and refinish your original treads for $50 a step and tint the stain to blend with nearby floors.
Removal is confirmed during your estimate once we see how the runner, pad and staples were installed. Our crew yanks out every staple and tack strip before new treads go on.
Plan on one working day for most straight runs of steps, two if there's stain or a landing. We'll tell you exactly when the stairs are usable again.
Usually yes, with care. A safe route stays open throughout, and on stain days we'll tell you which steps to skip until the finish dries.
Hickory and white oak hold up best to heavy traffic and pets. Red oak is the classic choice, and maple brings a bright, quiet look to modern homes.
Labor is collected when the carpenters arrive to start, and lumber gets paid for once it's dropped off. There's no large deposit held for weeks.
Yes. Our carpenters are NWFA certified, carry state licenses and full insurance, and stand behind stair labor for twelve months. A step that loosens gets fixed on a return visit.