.svg){kind=logo}
Walkthrough Before We Start
Hilly lots, damp springs and a century of settling leave floors off level, so our lead checks the subfloor, thresholds and stairs of your Stafford home first.
/ Brazil Floors of Connecticut
Hardwood Floor Installation in Stafford, CT
$2.25/Sq Ft labor, nails and underlayment included. Written price before we start.
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Installation
Book online now to lock in your next-day appointment and $250 discount.
/ Flooring Contractors IN STAFFORD
Hardwood Floor Installation Cost
Hardwood installation in Stafford is a flat $2.25/Sq Ft of labor, nails and underlayment included. A mill era home near Village Hill and a lake house on Crystal Lake pay the same number.
Nail Down Installation
Raw oak is nailed to the subfloor, then sanded and sealed in your house. A fitting choice for the older homes climbing Village Hill.
$2.25
/Sq Ft
What’s Included:
Underlayment Included
Nails Supplied
Professional Installation
Nail and Glue Down
Factory sealed boards glued and cleated for a tight, quiet floor you can furnish that evening. Frequent in newer homes toward Crystal Lake.
$2.50
/Sq Ft
What’s Included:
Nails Supplied
Glue Billed Separately
Professional Installation
Floating Floor
Engineered oak is floated over foam, edges glued. The right method over a slab or in a walkout basement cut into a Stafford slope.
$2.00
/Sq Ft
What’s Included:
Joint Glue Supplied
Underlayment Included
Professional Installation
.svg)
.svg)
Licensed, Insured Installation
Every installer on your Stafford job draws a Brazil Floors paycheck and holds a license, insurance and NWFA certification, with no outside crew sent in.
.svg)
Remeasure and Material Count
The first hour goes to measuring. Cartons, trim and reducers are then stacked near the entry in the order rooms get done, so no piece is missed.
.svg)
One Year Install Warranty
Our workmanship is guaranteed for one year, and the wood comes with the maker's warranty, so a bad seam and a bad board are both covered.
/ FLOOR PATTERN DESIGNS
Hardwood Floor Patterns
Straight lay, herringbone, chevron, diagonal and parquet all go in around Stafford, with borders and inlays priced at the visit. Old mill houses suit herringbone, and new builds along Route 190 often choose wide plank.
Straight Lay Hardwood
Planks run along the longest wall, the fastest layout with the least waste. A long Stafford living room reads even longer.
Herringbone Hardwood
Short boards turned at right angles in a zigzag, each cut and fit by hand. Period correct for an older dining room.
Chevron Hardwood
Boards mitered at 45 degrees so each row meets in a V. Looks sharp in open plan kitchens added to Stafford homes.
Diagonal Hardwood
Planks laid diagonally pull the eye corner to corner and make a small lake cottage kitchen feel wider.
Checkerboard Parquet
Oak blocks with the grain turned each way, in parquet style. A traditional finish for a den with a view of the hills.
Basket Weave Parquet
Short oak pieces interlaced over and under, framed by a darker border. Handsome in the front hall of a mill house.
/ OUR SERVICES
Hardwood Floor Installers in Stafford
The crew comes from our store and warehouse at 92 Munson St in Milford, about an hour and fifteen minutes away, and stays on your Stafford job until the last threshold is set. They rolled underlayment here, nailed the oak snug and squared each doorway, the way we work from Hydeville to Staffordville.
/ VINYL, REFINISHING AND STAIRS
Flooring Services in Stafford
Oak is the usual first call in Stafford, and our crew also handles vinyl plank, laminate, resanding, color, board repair and solid oak stair treads.
/ START YOUR PROJECT
Hardwood Floor Installation FAQ
Direct answers on price, scheduling and prep for hardwood installation in Stafford, from Village Hill out to Crystal Lake.
Get your Free In-Home EstimateWhat should I expect to pay for hardwood in Stafford?
Labor for nail down oak is $2.25/Sq Ft, nails and underlayment included. Nail and glue is $2.50/Sq Ft plus adhesive, and floating engineered boards are $2.00/Sq Ft.
Can new hardwood go over an old mill house subfloor?
Usually, once we check it for soft spots and flatness. Any repair or leveling shows up as a dollar line on the estimate before you decide.
How much extra is removing the old floor?
About $1.00/Sq Ft in Stafford. Your estimator names the exact figure after seeing what is under the surface.
Do your installers move furniture?
Yes, for a flat $250 the crew clears the rooms and sets everything back after the install.
When do I pay?
Labor is due on the day the crew arrives, material when the boxes are delivered. We take no deposit to hold a start date.
Does the crew drive far to reach Stafford?
They leave the Milford warehouse early and plan full days in town. Material delivery is next day after you order.
Can I compare colors in my own rooms?
Yes. The estimator carries samples to your house and lays them beside your baseboards and windows.
What is covered if something goes wrong?
One year on labor, plus the manufacturer's warranty on the wood. The people on your floor are licensed, insured and NWFA certified.
/ ALSO SERVING
Hardwood Floors in Nearby Towns
Stafford Springs, Hydeville, Orcuttsville or the shore of Crystal Lake, each home gets one dependable crew and a single labor price per Sq Ft.
Union farmhouses with worn carpet receive solid oak nailed over new plywood, at $2.25/Sq Ft for installation labor.
Willington rooms over concrete take floating engineered boards for $2.00/Sq Ft of labor, glued instead of nailed.
Tolland families choose prefinished planks because the surface is sealed on arrival and ready for dinner that night.
Ellington ranches get solid oak after the subfloor moisture is read, since old slabs and crawlspaces differ.
Somers farmhouses replace worn stairs with new oak treads at $60 each, stained to match the downstairs hall.
