.svg){kind=logo}
Walkthrough Before We Start
Houses near the Farmington River breathe with the seasons, so oak rests in your rooms until the meter agrees with the subfloor, then the first row goes down.
/ Brazil Floors of Connecticut
Hardwood Floor Installation in Simsbury, CT
$2.25/Sq Ft labor, nails and underlayment included. Written price before we start.
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Installation
Book online now to lock in your next-day appointment and $250 discount.
/ Hardwood Installers IN SIMSBURY
Hardwood Floor Installation Cost
Nail down hardwood in Simsbury is priced at $2.25/Sq Ft of labor, and the nails and underlayment ride inside it. A Drake Hill Road colonial and a Westledge Road home share one per-foot rate.
Nail Down Installation
Raw red or white oak nailed to plywood, then sanded and sealed in your house, a natural fit for the older colonials near Simsbury Center.
$2.25
/Sq Ft
What’s Included:
Underlayment Included
Nails Supplied
Professional Installation
Nail and Glue Down
Sealed boards cleated and glued for a solid, quiet floor you can furnish that evening, common in newer houses on Firetown Road.
$2.50
/Sq Ft
What’s Included:
Nails Supplied
Glue Billed Separately
Professional Installation
Floating Floor
Engineered oak floated over foam with glued seams, the way to cover a slab or a finished lower level under a Talcott Mountain home.
$2.00
/Sq Ft
What’s Included:
Joint Glue Supplied
Underlayment Included
Professional Installation
.svg)
.svg)
Licensed, Insured Installation
Each installer in your Simsbury home is a Brazil Floors employee holding a license, insurance and an NWFA certification. No other firm sends anyone.
.svg)
Remeasure and Material Count
Every room is measured, and cartons, trim and reducers are staged by the entry in the order they will be needed, so nobody hunts for a piece.
.svg)
One Year Install Warranty
Our labor carries a one year warranty and the wood carries its manufacturer warranty, which leaves both the work and the material covered.
/ FLOOR PATTERN DESIGNS
Hardwood Floor Patterns
Straight lay, herringbone, chevron, diagonal and parquet are all installed in Simsbury, with borders and inlays priced at the estimate. Historic houses near the Center lean toward herringbone, and large newer colonials request chevron.
Straight Lay Hardwood
Boards follow the longest wall, the quickest layout with the least waste, and they lengthen a formal living room.
Herringbone Hardwood
Short pieces set in a stepped zigzag and cut one at a time, a period look for a dining room near Simsbury Center.
Chevron Hardwood
Rows mitered at 45 degrees join in a clean V, which flatters the open kitchens of newer homes on Westledge Road.
Diagonal Hardwood
A diagonal run pulls the eye across a room and makes a narrow Station Street kitchen feel wider.
Checkerboard Parquet
Oak squares with alternating grain in parquet style, a classic finish for a study in a Terry's Plain Road home.
Basket Weave Parquet
Short oak pieces woven over and under, often inside a darker border, seen in the front rooms of older Hopmeadow Street houses.
/ OUR SERVICES
Hardwood Floor Installers in Simsbury
Our crew drives up Route 10 from the store and warehouse at 92 Munson St in Milford and stays on one Simsbury home to the end. Here they rolled out underlayment, nailed oak tight and scribed it around a built in bookcase, the work an Elm Street colonial receives.
/ VINYL, REFINISHING AND STAIRS
Flooring Services in Simsbury
Oak leads the requests around Simsbury, and our payroll crew also sets vinyl plank and laminate, refinishes, stains, repairs boards and replaces stair treads.
/ START YOUR PROJECT
Hardwood Floor Installation FAQ
Clear answers on price, prep and a start date for hardwood installation in Simsbury, from Tariffville to West Simsbury.
Get your Free In-Home EstimateWhat should I budget for hardwood installation in Simsbury?
Labor is $2.25/Sq Ft for nail down, $2.50 plus adhesive for nail and glue and $2.00 for floated engineered. When we provide the oak, the installed price is $5.50/Sq Ft unfinished or $6.00 prefinished.
Our 1800s house has uneven floors. Will new oak work?
It will after we level the sags and fasten the subfloor. Old framing moves, so we map the dips at the first visit and plan around them.
Can I put hardwood on a walkout level?
Engineered oak floated over a pad can go there, at $2.00/Sq Ft of labor, once the slab reads dry. Solid oak is reserved for wood framed floors.
Do you take out what is there now?
Yes, for about $1.00/Sq Ft with the debris hauled off. Squeaks and soft plywood are repaired before any new board is nailed.
How does the online booking discount work?
Book your estimate through our website and $250 comes off. We will also carry your furniture out and back for a flat $250.
When do I pay?
Labor is paid on the morning the crew arrives, and material is paid as the boxes are delivered. Sanding work splits in halves, one at the start and one at the last coat.
How long should I plan for?
Sealed oak across a few rooms is a day or two. Raw oak sanded and finished in place takes roughly a week.
Who does the work, and what is warranted?
Our payroll employees, never subcontractors, with a one year warranty on labor and the manufacturer warranty on the oak.
/ ALSO SERVING
Hardwood Floors in Nearby Towns
From historic houses on Hopmeadow Street to big colonials in West Simsbury, one steady crew works at a single labor rate per Sq Ft.
Granby farmhouses with worn plank subfloors get plywood first, then oak nailed down at $2.25/Sq Ft of labor.
Avon colonials take solid oak cleated down for $2.25/Sq Ft, with nails and underlayment included.
Canton walkout lower levels over concrete take floated engineered oak, labor at $2.00/Sq Ft with pad.
Bloomfield families pick prefinished oak because it arrives sealed, and the room works by that evening.
East Granby homes get raw oak installed, sanded and sealed on site, $5.50/Sq Ft with material from us.
