Walkthrough Before We Start
Many Rochester houses sit on wooded lots with damp crawl spaces, so the lead installer probes the subfloor, the doorways and the stairs before any wood leaves its box.
Many Rochester houses sit on wooded lots with damp crawl spaces, so the lead installer probes the subfloor, the doorways and the stairs before any wood leaves its box.
Brazil Floors installers are our own employees, not subcontractors, and each one is licensed, insured and certified by the NWFA.
Day one starts with a fresh measure of every room. Cartons, trim and reducers get staged where they will be used, so nailing goes on without pauses.
A full year of workmanship coverage comes from us, and the planks keep the mill's materials warranty, so the job and the oak each have protection.

Laying planks along the longest wall is the quickest layout and leaves the least waste. A narrow ranch hallway looks longer this way.

Boards cut short and set in alternating directions form a zigzag. A fitting detail for a formal dining room in an older colonial.

Boards are mitered at 45 degrees so every course meets in a neat V, a look that works in an open kitchen.

Set at an angle to the walls, planks draw the eye across the room and make a modest kitchen seem larger.

Squares of oak with the grain turned in alternate directions give a parquet effect, nice in a sunroom.

Short strips woven in an over and under weave, often framed with a border, bring character to an older hall.



Labor for nail down is $2.25/Sq Ft, with the nails and underlayment covered. The wood adds up to a $5.50/Sq Ft unfinished package or $6.00/Sq Ft prefinished.
Yes. The crew rips out the carpet and pad, takes up the tack strips, secures any weak subfloor and nails the oak down over solid plywood. Pulling up the old floor adds roughly $1.00/Sq Ft.
Engineered hardwood floated over underlayment, with no nails into the concrete. That install costs $2.00/Sq Ft in labor.
Yes. Laminate labor is $1.99/Sq Ft and vinyl plank labor is $2.00/Sq Ft, and vinyl is the safer pick where moisture is a worry.
Material rolls out of the Natick warehouse the next day, so boxes are usually at your house soon after you order.
A finished new tread is $60, covering riser, nosing, stain and labor. Sound stairs you already own can instead be refinished for $50 per step.
Labor is due when the crew starts, material when it is delivered, and sanding in two halves at the start and the final coat.
Our labor has a one year warranty and the mill covers the boards. The installers on site hold a license, insurance and NWFA credentials.