.svg){kind=logo}
Walkthrough Before We Start
Muddy cleats from the ball field, a heavy couch dragged across the den, a lab shedding in August. Oak with a tough satin finish takes all of it.
/ Brazil Floors of New Jersey
Hardwood Floor Installation in Riverside, NJ
$2.25/Sq Ft labor, nails and underlayment included. Written price before we start.
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Installation
Book online now to lock in your next-day appointment and $250 discount.
/ Hardwood Installers IN RIVERSIDE
Hardwood Floor Installation Cost
Hardwood installation in Riverside starts at $2.25/Sq Ft for nail down labor, nails and underlayment included. Supply the boards through us and the finished floor is $5.50/Sq Ft unfinished or $6.00/Sq Ft prefinished.
Nail Down Installation
Raw oak that we sand and coat in the house runs $5.50/Sq Ft installed, with boards, nails and the underlayment beneath them all counted.
$2.25
/Sq Ft
What’s Included:
Underlayment Included
Nails Supplied
Professional Installation
Nail and Glue Down
Boards that arrive already sealed come to $6.00/Sq Ft with installation, and the room is usable once the final strip is fastened.
$2.50
/Sq Ft
What’s Included:
Nails Supplied
Glue Billed Separately
Professional Installation
Floating Floor
Slab under the floor or a finished lower level? Floating engineered wood is $2.00/Sq Ft for labor and needs no nails into concrete.
$2.00
/Sq Ft
What’s Included:
Joint Glue Supplied
Underlayment Included
Professional Installation
.svg)
.svg)
Licensed, Insured Installation
Boxes leave our warehouse in Long Branch, NJ, and next-day delivery from Long Branch puts them on your porch, so the crew starts without waiting on freight.
.svg)
Remeasure and Material Count
Our estimator carries oak, engineered and prefinished sample boards to your door and sets them on your own subfloor, where river light shows the true color.
.svg)
One Year Install Warranty
Labor on every install is covered for one year, and the boards keep the maker warranty. Payroll employees lay each floor, with no subcontractors on your job.
/ FLOOR PATTERN DESIGNS
Hardwood Floor Patterns
A narrow twin by the river, a bungalow off Route 130 and a renovated rowhouse all call for different install methods. Here is how we match them.
Straight Lay Hardwood
Red oak nailed over a flattened subfloor quiets the bounce in older hallways of twin homes.
Herringbone Hardwood
Floating engineered boards suit a Riverside basement slab where nails would never hold.
Chevron Hardwood
Tight porch steps and narrow doorways stop nobody, since the crew hand carries each bundle indoors.
Diagonal Hardwood
Nail and glue at $2.50/Sq Ft plus adhesive keeps boards tight over plywood in a post war cape.
Checkerboard Parquet
A pale prefinished oak brightens a dim rowhouse living room that only gets light from the front.
Basket Weave Parquet
A hard coat holds up to kids, pets and wet boots tracked in from the yard.
/ OUR SERVICES
Riverside Hardwood Installers
Riverside rowhouses, twins and bungalows get oak from this crew. We level the old subfloor, roll out paper, blind nail each strip and vacuum the rooms before we leave.
/ VINYL, REFINISHING AND STAIRS
Flooring Services in Riverside
Twins and bungalows a few blocks from Pavilion Avenue are ready for new oak, and the same crew handles vinyl, laminate, sanding, staining, board repair and stairs.
/ START YOUR PROJECT
Hardwood Floor Installation FAQ
Planning oak for a twin near Pavilion Avenue or a bungalow close to the river? Call or text 732-851-1059 and we bring samples to the house.
Get your Free In-Home EstimateWhat should I budget for hardwood installation in Riverside?
Riverside crews charge $2.25/Sq Ft to nail down, $2.50 to nail and glue with adhesive extra, and $2.00 to float engineered wood. Buying boards from us makes the all in price $5.50/Sq Ft for unfinished stock and $6.00/Sq Ft for prefinished.
My twin has a sagging spot near the kitchen. Can oak still go in?
Yes, once we shim or sister the low area and screw down loose subfloor. Houses of that age move, so we map the floor at the estimate.
Can hardwood go in a basement here?
Solid oak is a poor match below grade, but floated engineered boards at $2.00/Sq Ft of labor work over a dry slab. We test moisture before suggesting it.
Will you pull up the old floor?
Tear-out runs about $1.00/Sq Ft and we carry the debris off. Squeaks are secured before any new strip is nailed.
Can the estimate discount be used for hardwood work?
Schedule your visit through the website and the bill drops by $250. Our crew will also clear the rooms for a flat $250.
How many days should I plan for?
A pair of prefinished rooms usually wraps in a day or two. Raw boards that get sanded and sealed on site take about a week.
Where is the wood stored before it arrives?
Everything ships from our warehouse in Long Branch, NJ, and you get next-day delivery from Long Branch after the order is placed.
Who actually works in my home, and what stands behind it?
Only our licensed, insured employees, never subcontractors. You get a one year labor warranty, and the boards keep the manufacturer warranty.
/ ALSO SERVING
Hardwood Floors in Nearby Towns
Our hardwood crews also floor homes in Delran Township, Delanco, Cinnaminson, Beverly and Edgewater Park along the Delaware.
Delran split levels take nail down oak at $2.25/Sq Ft of labor.
Small river homes in Delanco get solid oak over leveled plank subfloors.
Cinnaminson colonials choose wide prefinished boards at $6.00/Sq Ft installed.
Older Beverly houses near the water want new strips laid tight and flat.
Edgewater Park ranches go with floated engineered planks at $2.00/Sq Ft of labor.
