Walkthrough Before We Start
A lead installer walks every room before ordering, pressing the subfloor for soft spots and noting door clearances, since river country moisture can leave older Dighton floors uneven.
A lead installer walks every room before ordering, pressing the subfloor for soft spots and noting door clearances, since river country moisture can leave older Dighton floors uneven.
The people installing your floor work for Brazil Floors directly. They hold licenses and insurance, they are NWFA certified and none of them is a subcontractor.
The first morning starts with a fresh measure. Cartons are stacked room by room and the transitions are set at each doorway, so nailing proceeds without a pause.
We stand behind our labor for one year. The mill's own warranty covers the wood, so a mistake in the install and a flaw in the boards are both accounted for.

Boards that follow the longest wall waste the least material and make a modest room feel longer.

Short planks set in a zigzag give an old farmhouse hall a hand built look that suits its age.

Planks mitered to meet at a point add rhythm to the open layouts of newer homes in town.

A 45 degree diagonal carries the eye corner to corner, which helps a narrow den feel broader.

Parquet squares with the grain alternating revive an old pattern in a sunroom or a den.

Strips woven over and under, usually with a contrasting border, bring detail to a dining room in an older house.



Nail down labor is $2.25/Sq Ft with nails and underlayment in the rate. If you buy the wood through us, the package comes to $5.50/Sq Ft unfinished or $6.00/Sq Ft prefinished.
Yes. We check the framing, screw down loose spots, and add plywood where needed so the new oak lies flat and quiet.
Floating engineered hardwood, glued at the joints over underlayment so no fastener touches the concrete. Labor for that method is $2.00/Sq Ft.
Yes. Vinyl plank labor is $2.00/Sq Ft and laminate labor is $1.99/Sq Ft, so one crew can finish the whole first floor.
It ships from the Natick warehouse and arrives the next day, so scheduling is rarely held up by materials.
A new hardwood tread is $60, which includes the riser, nosing, stain and labor. Refinishing a good step is $50.
Labor is paid when the crew begins, and material when the boxes are delivered. Sanding is billed 50% at the start and 50% at the final coat.
It does: one year on our labor and the manufacturer's coverage on the material, from a licensed, insured, NWFA certified crew.