Samples on Your Own Wood
Every sample sits inside a blue tape border on the sanded oak, so you judge the colors together, by the window and in the shade.
Every sample sits inside a blue tape border on the sanded oak, so you judge the colors together, by the window and in the shade.
Leftover sanding marks turn dark under stain, so a buffer with fine screens follows the drum sander and the vacuum picks up what remains.
Stain is wiped onto one section at a time and the excess pulled before the next, so no lap lines show across a Columbia living room.
Columbia staining is done by Brazil Floors payroll staff, NWFA trained and insured, with the labor warrantied for twelve months.



Staining in Columbia is $2.00/Sq Ft, with stain samples on your own floor, hand applied color and a clear protective top coat in that rate. A full sand, stain and three coats of poly is the separate $2.50/Sq Ft refinishing service.
Yes. After the orange finish is sanded off, the bare oak accepts brown, walnut or espresso without blotching.
Dark walnut and natural oak are the favorites in Columbia, followed by espresso, light gray and custom blends. A few taped samples usually decide it.
Yes. Edgers and hand scrapers get into the corners the big machine misses, and the steps take the same color as the hall.
Most stains dry overnight. Before the clear coat goes on, the crew confirms the stain is dry so the finish stays uniform.
Most Columbia families stay home, though some spend one night out while the finish cures because of the smell. Water-based poly airs out quickest.
Usually the day after measuring. One small crew does the sanding, staining and sealing from the first day to the last.
Yes. The staining crew is NWFA trained and on the Brazil Floors payroll, and the labor is warrantied for twelve months.