Samples on Your Own Wood
Blue tape frames each stain sample on sanded oak, so you can compare them side by side by a window and in a dim corner.
Blue tape frames each stain sample on sanded oak, so you can compare them side by side by a window and in a dim corner.
Machine marks show up dark under stain, so a fine screen buffer smooths the boards and a vacuum follows before color goes on.
The crew works one patch at a time, wiping color on and pulling the excess before moving on, so no lap marks show between sections.
Brazil Floors employees stain every Brewster floor, NWFA trained and insured, with labor warrantied for twelve months.



Staining is $2.00/Sq Ft, including samples on your own floor, hand applied color and a clear protective top coat. If you want a full sand, stain and three coats, that is our $2.50/Sq Ft refinishing.
Yes. Once the old finish is sanded away, fresh oak accepts brown, walnut or mahogany without the tint.
Natural oak, soft gray and walnut lead, with espresso and custom blends close behind.
Yes. Edgers and hand scrapers reach what the big sander cannot, then color ties the steps to both floors.
Most stains dry overnight, and we test the surface before the clear coat so the color does not smear.
Many families stay, though some choose a night elsewhere while the finish cures because of the odor.
Often the day after the measure, and the same few people handle sanding, stain and seal.
Yes. Our own NWFA trained employees do the work, with a twelve month labor warranty.