Dustless Floor Refinishing
Our sanders vent into a sealed bag through a hose, so dust stays off the TV and the counters. A last air pass clears the trim.
Our sanders vent into a sealed bag through a hose, so dust stays off the TV and the counters. A last air pass clears the trim.
Under 1,500 Sq Ft, expect 3 days without stain or 4 with it, plus a spare day when the air is damp. Socks at 24 hours, furniture at 48.
A board swollen by a leaky dishwasher or dented by a dropped anchor is cut out and replaced from $150, then sanded into the floor.
Labor is covered for a full year, and our sander operators are licensed, insured and NWFA certified. Sanding is paid half at start, half at the end.

Clear coat with no color leaves oak bright and beachy in the small cottages near Stannard Beach.

A medium brown hides sandy footprints and dog fur in the family capes off South Main Street.

A cool smoky tone takes the orange out of red oak in raised ranches on Horse Hill.

A golden shade with mild red warmth suits the older colonials near Westbrook Center.

Rich walnut shows every grain line and looks handsome under a dining table in an older house near Pilot's Point.

Nearly black and sleek, a modern choice for a remodeled open plan, though pet hair shows sooner.



Refinishing costs $2.50/Sq Ft and pays for sanding, one stain color and three poly coats. Oak that is dull but sound might only need the $1.00/Sq Ft screen and recoat.
Most surface scratches and worn finish sand out, and the floor ends up looking new. Deep gouges or boards that cupped from moisture are handled by board repair first.
Yes. Sanding removes the aged finish, and a cool stain such as Jacobean or Provincial cancels much of the red, tried on your own floor beforehand.
Socks are fine the next day, and furniture can return after two days. Wait about two weeks for rugs while the finish hardens.
Yes, for a flat $250 per house. Taking out old flooring beforehand is about $1.00/Sq Ft.
Half is due the day the crew begins and half comes at the final coat. Nothing more is asked in advance.
Sanders feed into sealed bags and the crew wipes ledges before leaving. A fine film can still reach high shelves, so we wipe those too.
We check the wear layer at the estimate and tell you honestly. When a full sanding is too much, a screen and recoat is the safer job.