Dustless Floor Refinishing
Each sander is hooked to a vacuum bag, so dust stays out of the air and off your shelves and TV.
Each sander is hooked to a vacuum bag, so dust stays out of the air and off your shelves and TV.
You compare stain swatches on your own floor, in morning light and under the lamps, before choosing one.
Boards warped by a leaky dishwasher or gouged by a furniture leg are cut out and replaced from $150, then sanded flush.
Twelve months of warranty cover our labor, and the sanders are licensed, insured and NWFA certified. You pay half at the start of sanding and half with the last coat.

A clear coat with no tint keeps oak bright and breezy in a small beach cottage.

A medium brown hides sand and pet hair in a family room.

A cool smoky tone takes the orange glow out of old red oak.

A golden shade with a little red warmth suits an older house with painted trim.

Deep walnut shows off grain lines under a dining table.

Almost black stain looks sleek in a modern remodel, though it shows pet hair sooner.



The flat rate is $2.50/Sq Ft and includes sanding, your stain and three poly coats. A floor that is only dull may just need a $1.00/Sq Ft screen and recoat.
Yes. Sanding strips the yellowed finish, and a cooler stain tones down the red. Samples go on your own boards for you to choose.
Those get replaced first, from $150, then the whole room is sanded so the patch blends.
Outside or behind a closed door while the crew is working. Fresh finish needs time to cure before paws touch it.
The machines pull dust into a sealed bag, and the crew vacuums before stain.
No. Leave a key with a neighbor or in a lockbox so the crew can work through the last coat.
It is $50 per step, hand sanded and stained, with risers not included.
Half when sanding begins, half at the final coat.