Dustless Floor Refinishing
Each sander runs into a vacuum bag by hose, which keeps dust off the television, the counters and the bookshelves.
Each sander runs into a vacuum bag by hose, which keeps dust off the television, the counters and the bookshelves.
Half of the sanding price is paid when we start and the other half at the final coat. Furniture handling is $250 flat.
A board swollen by a leaky appliance or dented by a crate is replaced from $150, then sanded flush with the room.
Our labor is warrantied for a year. The crew behind it holds licenses, insurance and NWFA credentials.

A coat with no color keeps oak light and breezy in a small lake cottage.

Medium brown hides scuffs and fur in a busy house with a big dog.

A cool, smoky shade cuts the orange from red oak installed in the nineties.

A golden tone with a hint of red warmth suits older farmhouses near Norfolk center.

Rich walnut puts every grain line on display under a dining table.

Almost black reads sharp in a remodeled open plan, though dust and light fur show.



The rate is $2.50/Sq Ft for sanding, your stain and three coats of poly. Floors that are sound but dull may only need the $1.00/Sq Ft screen and recoat.
Yes. After the old finish is sanded off, a cooler stain removes much of the red, and we try samples on your own boards first.
If the wood is clean and the finish is merely dull, a recoat will do. Deep wear, stains or old color call for sanding to bare wood.
Half when sanding begins and half when the last coat is on.
Yes. Replacement starts at $150, with the price set at the visit.
Yes, refinishing runs $50 per step, and brand-new hardwood treads are $60 each.
Yes, our employees do all of it. All of them carry a license, insurance and NWFA certification.
The labor, for one year. Finish products have their own manufacturer terms.