Dustless Floor Refinishing
Sander dust is pulled through a hose into a sealed bag so furniture and shelves stay clean. Before staining we vacuum trim and edges once more.
Sander dust is pulled through a hose into a sealed bag so furniture and shelves stay clean. Before staining we vacuum trim and edges once more.
Some floors are fine with a $1.00/Sq Ft screen and recoat. The estimate is where we say honestly which job yours is.
A plank swollen by a leaking appliance can be replaced for $150 and up, then sanded flush into the room.
Labor carries a year of warranty from licensed, insured and NWFA certified installers. You pay half when sanding starts and half after the final coat.

A clear coat without tint keeps oak pale and breezy in a small beach cottage.

A medium brown covers sandy scuffs and pet hair in a family room.

A cool smoky shade takes the red out of older oak and sits well with white trim.

A golden shade with a hint of warmth belongs in a captain's house with period trim.

Deep walnut shows off every grain line under a farm table.

A near-black finish looks sleek in a remodeled open plan, though pet hair shows fast.



It is $2.50/Sq Ft, and that covers sanding, stain and three coats of poly. A sound floor might need only a screen and recoat at $1.00/Sq Ft.
Yes. Sanding removes the aged amber finish, and a stain picked from samples on your boards sets a new tone, from cool brown to walnut.
The sanders connect to vacuum bags, which catch most of the dust at the source. The room is vacuumed again before any finish goes on.
Out in the yard or behind a shut door whenever the crew is sanding or coating. Once the finish has cured, paws are fine, and short nails keep it looking good.
No. A key with a neighbor or in a lockbox is enough, and the crew comes back each day until the coats are down.
It is $50 per step with stain, hand sanded to match the upstairs floors. Risers are not in that price.
Yes, from $150, priced at your house. We pull the bad pieces, install new oak and sand it level.
Half at the start of sanding and half at the final coat. The labor warranty lasts one year.