.svg){kind=logo}
Dustless Floor Refinishing
Our dustless floor refinishing machines pull up dust as they sand. Then we blow off the walls and ceiling and vacuum the room before any coat.
/ Brazil Floors of Rhode Island
Hardwood Floor Refinishing in Barrington, RI
Sand, Stain and Refinish Your Hardwood Floors
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Refinishing
Book online now to lock in your next-day appointment and $250 discount.
/ Floor Refinishers IN BARRINGTON
Hardwood Floor Refinishing Cost
Refinishing hardwood floors in Barrington comes at a flat rate of $2.50/Sq Ft, and the stain plus three coats of poly are part of it. From Nayatt to Sowams, the price holds with no hidden fees.
Hardwood Floor Resanding
Hardwood floor resanding takes the worn finish and gray traffic paths down to clean wood, so chair scuffs vanish.
$2.50
/Sq Ft
What’s Included:
Dustless Sanding
Stain Included
Three Coats of Poly
Restaining Hardwood Floors
Restaining hardwood floors starts with one coat of color after sanding, and we test samples right on your boards.
$2.50
/Sq Ft
What’s Included:
Samples on Your Floor
One Coat of Stain
Three Coats of Poly
Water Based Polyurethane
Water based polyurethane from Bona dries clear and smells much less than oil, a smart pick for homes with pets.
$2.50
/Sq Ft
What’s Included:
Bona Water Based
Low Odor
Clear Natural Look
.svg)
.svg)
3 to 5 Day Refinishing
Under 1,500 Sq Ft, a refinish takes 3 to 4 days, so we plan one extra day. Walk on it 24 hours after the last coat, furniture goes back after 48.
.svg)
Hardwood Floor Repair
Hardwood floor repair begins at $150 to replace one damaged board. We fix all the pet stains and cupping before sanding, so the patch blends in.
.svg)
One Year Refinish Warranty
Every refinish carries a one year labor warranty. You pay 50% when the crew starts sanding and the other half once the final coat of poly is down.
/ STAIN COLORS AND FINISHES
Hardwood Floor Stain Colors
Picking a hardwood floor stain color is easier on your own boards. We brush a few samples in the room, you look at them in daylight and then we choose the one that fits the house.
Natural Hardwood Floors
No stain, just clear poly on the wood, so white oak stays light and fresh in sunny Nayatt living rooms.
Special Walnut Stain
A warm mid brown that hides daily wear, loved in busy kitchens and family rooms in Hampden Meadows.
Provincial Stain
A soft, neutral brown that goes well with any trim and calms the orange look that old red oak gets in Bay Spring.
Early American Stain
A rich brown with a hint of red that looks right at home in Rumstick Point colonials with crisp white trim.
Dark Walnut Stain
Deep and dark but never black, it gives a Tyler Point dining room a formal feel and still shows the grain.
Jacobean Stain
Almost black, this brown is a bold choice for a large open room. Dust shows on it a bit sooner, so we tell you up front.
/ OUR SERVICES
Hardwood Floor Refinishers in Barrington
Around town, most floors we refinish are red or white oak in old colonials and capes worn down by years of kids, pets and beach sand. The crew sands each room down to fresh wood, vacuums every corner, then adds the color and builds the poly up so the whole room looks new.
/ SANDING, STAIRS AND INSTALLATION
Floor Sanding in Barrington
Need more than a refinish? We sand brand new floors after install, refinish worn stairs at $50 per step with stain included and screen and recoat for $1.00/Sq Ft.
/ START YOUR PROJECT
Refinish Your Floors Next Day
Most homeowners in Bay Spring and Sowams want to know how long hardwood floor refinishing will take, where all the dust goes and when they can walk again.
Get your Free In-Home EstimateHow much does hardwood floor refinishing cost in Barrington?
It is a flat rate of $2.50/Sq Ft, which covers the sanding, a coat of stain and three coats of poly. If the floor only needs a buff and recoat, that is $1.00/Sq Ft.
How long does it take to refinish wood floors?
For floors under 1,500 Sq Ft, natural color takes 3 days and stain adds one more. We always ask for one extra day, so plan on 5 to avoid surprises.
When can we walk on the floors again?
Give it a full 24 hours after the final coat before you walk on it in socks. After 48 hours, you can set the furniture and all the rugs back down again.
Is your floor sanding really dustless?
Yes, it is. Our sanders pull the dust in while they run, then we blow down every wall and the ceiling and vacuum top to bottom before staining.
Can you change the color of orange looking oak?
Sure. Once the floor is down to bare wood, we try Natural, Provincial or Dark Walnut samples right on the boards, and you choose in your own light.
What does stair refinishing cost?
Each step costs $50 with the stain included, and we sand every tread so it blends with the floors on the landing. Just note that risers are not included.
How do payments work for a refinish job?
You pay 50% when our crew arrives to begin sanding and the other 50% when the final coat goes on. We never ask for money before work begins.
Do I need to be home while you refinish in Barrington?
Not at all, as long as we can get into the house the whole time. Our crew is NWFA certified, and every job comes with a one year labor warranty.
/ ALSO SERVING
Local Floor Refinishing Experts
We also refinish floors in Warren, Bristol, East Providence, Providence and Seekonk with dustless sanding and one price per Sq Ft, from a single bedroom to the whole house.
Pulled up old carpet near Water Street and found oak hiding under it? Our floor refinishing makes it shine again at $2.50/Sq Ft.
Sand from the beach chews through finish fast, so floor sanding takes each room down to bare wood before any coat goes on.
Out in Rumford, a lot of homeowners ask for darker floors, and our hardwood floor staining gives each room a new look in days.
Tenant moved out and left scratches or pet stains? Our wood floor repair swaps bad boards from $150 and gets the unit ready.
Our stair refinishing sands and stains worn treads for $50 per step so they match the floors upstairs. Risers are not included.
