Treads, Risers and Nosing
Tread woods include red oak, white oak, hickory and maple, each one inch thick and bull nosed, with a riser to match.
Tread woods include red oak, white oak, hickory and maple, each one inch thick and bull nosed, with a riser to match.
Tread samples ride along with the estimator. Hold them at the foot of your stairs against your floor and the right wood is clear.
Loose steps are screwed down tight before anything else. After that, every new tread is fitted against the wall, glued and nailed home.
Stair labor is warrantied for one year, and the work is done by a licensed, insured, NWFA certified crew. If something slips, we fix it.



$60 per step. That covers the hardwood tread, the riser, the nosing, stain to match your floor and the labor.
Yes. The carpet, pad and staples are removed, and the cost is worked out at your free estimate.
If the treads are solid oak, hand sanding and refinishing is $50 per step. Cracked or thin treads are replaced.
Yes. Oak risers in the tread stain make an all-wood stair, and white paint makes a crisp contrast.
In most cases. Loose steps are secured first, and each tread is fitted, glued and fastened so it stays quiet.
We add a return to the exposed end so the rounded nose wraps the side and each tread looks finished.
Red oak, white oak, hickory and maple are the options. Samples come to your house so you can judge them against your floor.
Yes, for one year on labor, and the crew is licensed, insured and NWFA certified.