.svg){kind=logo}
Treads, Risers and Nosing
We cut treads from red oak, white oak, hickory and maple, each 1 inch thick and 11 1/2 inches deep, with a bull nose and a riser to go under it.
/ Brazil Floors of Rhode Island
Stair Installation in Richmond, RI
New Stair Treads, Risers and Nosing
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Stair Install
Book online now to lock in your next-day appointment and $250 discount.
/ Stair Installers IN RICHMOND
Stair Installation Cost
Richmond stair jobs come in at $60 a step, start to finish. In that single price are the hardwood tread, the riser, a bull nose, stain mixed for your floor and the crew who drives out to set it.
New Hardwood Stairs
Here $60 per step pays for a 1 inch hardwood tread, a riser below, the rounded bull nose, stain in the color you like and the installers' work.
$60
/Step
What’s Included:
Tread, Riser and Nosing
Stained to Match on Site
Glued and Fastened Down
Laminate Stairs
Putting laminate on stairs runs $50 a step for labor. We cap every one with a nose cut to match the plank, so the flight and floor look whole.
$50
/Step
What’s Included:
Labor on Each Step
Matching Stair Nose
Flows Into Your Floor
Carpet to Hardwood Stairs
Carpeted stairs are stripped bare, from the carpet and pad down to tack strips and staples, and we price the removal on site that day.
$60
/Step
What’s Included:
Carpet and Tack Strips Out
Removal Priced at Estimate
New Oak Treads and Risers
.svg)
.svg)
Tread Samples at Home
We pack tread samples for every estimate, and setting a few on your own steps beside the floor makes the wood and stain easy to pick.
.svg)
Quiet, Solid Steps
Farmhouse stairs settle, so we start by screwing loose steps tight. Then each new tread gets a careful scribe, glue and fasteners.
.svg)
One Year Stair Warranty
Our crews are licensed, insured and NWFA certified, and you get one year of warranty on the stair labor. If a step shifts, we return.
/ OUR SERVICES
Stair Installers in Richmond
We build stairs in Usquepaug farmhouses, Shannock mill houses, ranches by Kenyon and newer Wyoming homes. Carpet comes up, weak steps get screwed tight and hardwood treads are laid over new risers, commonly the next day. We stain each tread right inside.
/ RED OAK, WHITE OAK, HICKORY AND MAPLE
Wood Stair Treads and Risers
Steep farmhouse stairs and wide new home stairs need different answers, so we help you match tread wood, risers and trim to yours.
Red Oak Treads
Red oak, stained warm, fits the old floors of Usquepaug farmhouses down by the river.
White Oak Treads
White oak's light, clean grain looks right in a ranch out near Kenyon by the mill.
Hickory and Maple Treads
Hickory takes muddy boots from Carolina trails, and maple adds light to a Wyoming home.
Painted or Wood Risers
In Shannock, people choose painted white risers or oak risers stained to match the tread.
Open Stairs and Return Ends
For an open stair in an Alton home, return ends give every tread end a rounded side.
Landing Treads
Near Beaver River, the landing tread lines up with the upstairs floor so the top step sits flush.
/ Floors, Repairs and Stain
Hardwood Floor Services in Richmond
Homes around Wyoming and Kenyon get oak floors refinished, gouged boards patched and restained, hardwood in new additions and vinyl plank or laminate in mudrooms.
/ START YOUR PROJECT
Stairs Done in Days
Want new stairs in Wyoming or out by Carolina? Call or text 401-519-7870 and an estimator will come out with oak samples, free.
Get your Free In-Home EstimateHow much is one new stair step in Richmond?
One step is $60, and it buys you the hardwood tread, riser, bull nose, a stain of your choosing and installation.
Do you strip carpet off the stairs?
We do. Every scrap of carpet and pad comes up with the tack strips and staples, and removal is priced on site.
Can farmhouse treads be refinished?
If the wood is sound, hand sanding and refinishing costs $50 per step. Old farmhouse treads with splits get new wood instead.
Are oak risers available instead of paint?
Yes. Your risers can be oak in the tread stain, or painted white for that classic farmhouse feel.
Can new treads fix a squeaky farmhouse stair?
Usually. We screw loose steps down first, then the new treads are cut to fit, glued and fastened tight.
What is done with the open side of a stair?
A return end goes on each exposed end, turning the rounded nose so the side looks tidy and finished.
What is the wait, and how long is the work?
Most jobs kick off right after you book and last up to two days. Prefinished treads arrive weeks later on order.
Is your work insured and warrantied?
Yes. Our crews are licensed, insured and NWFA certified, and the labor warranty lasts one year.
/ ALSO SERVING
Stair Contractors Nearby
Our installers also cover Exeter, West Greenwich and Charlestown, plus Hopkinton and South Kingstown, with quick start dates.
In Ashaway, a new hardwood step costs $60 with riser, nose, stain and our labor.
Near Arcadia, white oak stair treads bring light into a dim farmhouse stairwell.
In Kingston, hardwood stairs replace carpet that students and pets have worn out.
By Burlingame State Park, our stair contractors anchor every step before new wood.
At Nooseneck, worn but solid oak steps get a hand refinish, priced at $50 each.
