Treads, Risers and Nosing
Choose red oak, white oak, hickory or maple. Every tread is 1 inch thick, 11 1/2 inches deep and rounded at the front, and it sits on a new riser.
Choose red oak, white oak, hickory or maple. Every tread is 1 inch thick, 11 1/2 inches deep and rounded at the front, and it sits on a new riser.
Our estimator brings samples of each tread wood. Hold them next to the floor at the bottom of the stairs and the match becomes obvious.
Wobbling steps are screwed tight first. Then the installer scribes each tread to the wall, glues it and fastens it so it stays silent.
The crews are licensed, insured and NWFA certified, and our stair labor carries a one year warranty. If something slips, we put it right.



Each step is $60, covering the tread, riser, nosing, stain matched to your floor and the labor.
Yes. Carpet, pad, tack strips and staples are removed, and the price is confirmed at your estimate.
Treads of solid oak can be sanded by hand and refinished for $50 per step. Treads that are cracked or thin need replacing.
Yes. Stained oak risers give an all-wood look, and white paint gives a crisp contrast.
For the most part, yes. Loose boards are screwed down first, then each tread is glued and fastened.
We add a return to each exposed end so the rounded nosing continues around and every tread looks finished.
It depends on how many steps there are and whether the wood is unfinished or prefinished. The estimator sets out the plan in writing.
Yes. We guarantee stair labor for a year, and the people on site are licensed, insured and hold NWFA certification.