Treads, Risers and Nosing
Pick red oak, white oak, hickory or maple. Every tread is 1 inch thick and 11 1/2 inches deep, rounded at the nose.
Pick red oak, white oak, hickory or maple. Every tread is 1 inch thick and 11 1/2 inches deep, rounded at the nose.
Wood samples come in the estimator's truck. Set them against the floor at the foot of the stairs and the right one stands out.
Before anything is laid, any wobbly step is screwed down solid. The installer then scribes each new tread against the wall, glues it and fastens it.
Our installers are licensed, insured and NWFA certified, and the stair labor has a one year warranty.



It is $60 per step, covering the hardwood tread, riser, nosing, stain and labor.
Yes. Carpet, padding, tack strips and staples all go, and the removal cost is quoted at your house.
Solid oak treads can be sanded by hand and finished for $50 a step. Thin or cracked ones should be replaced.
Yes. Match the tread stain for a solid wood look, or paint them white for a clean contrast.
Normally. Loose steps are secured first, and each new tread is fitted, glued and fastened.
A return piece goes on each exposed end, so the nosing wraps around and the step looks complete.
Your estimator lays out the timeline at the free visit, since stain choice and wood affect it.
It does: a year on labor, from a licensed, insured and NWFA certified crew.