.svg){kind=logo}
Treads, Risers and Nosing
Pick from red oak, white oak, hickory or maple treads. Each one is a full inch thick, 11 1/2 inches deep, bull nosed on the front edge and paired with its riser.
/ Brazil Floors of Connecticut
Stair Installation in Granby, CT
New Stair Treads, Risers and Nosing
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Stair Install
Book online now to lock in your next-day appointment and $250 discount.
/ Stair Installers IN GRANBY
Stair Installation Cost
A new stair in Granby costs $60 per step and the figure stays put. One hardwood tread, one riser, the bull nose, stain blended to your existing floor and our own installer are all inside that number.
New Hardwood Stairs
For $60 a step you get a 1 inch hardwood tread set on a new riser, a bull nose on the front, your stain color and installation by our payroll crew.
$60
/Step
What’s Included:
Tread, Riser and Nosing
Stained to Match on Site
Glued and Fastened Down
Laminate Stairs
Running laminate up the stairs is $50 per step for labor, with a nose piece in the identical shade on each edge so the steps continue the floor below.
$50
/Step
What’s Included:
Labor on Each Step
Matching Stair Nose
Flows Into Your Floor
Carpet to Hardwood Stairs
We strip the carpet off the steps, then the pad, the tack strips and every staple, and the removal price is agreed during the free in-home visit.
$60
/Step
What’s Included:
Carpet and Tack Strips Out
Removal Priced at Estimate
New Oak Treads and Risers
.svg)
.svg)
Tread Samples at Home
Real tread samples ride along on the free estimate. Set them on the floor at the bottom of your Granby stairs and the right species picks itself.
.svg)
Quiet, Solid Steps
Before a single tread goes on, wobbly steps get screwed to the stringers. Each new tread is then scribed to the walls, bedded in glue and fastened so it never talks back.
.svg)
One Year Stair Warranty
Every staircase is built by licensed, insured, NWFA certified Brazil Floors employees, and the labor stays under warranty for twelve months. If a tread shifts, we return and fix it.
/ OUR SERVICES
Stair Installers in Granby
Our Granby stair work covers colonials near Granby Center, capes along Route 10, ranches in West Granby and farmhouses up in North Granby. The carpet comes off, loose steps get anchored, new risers and hardwood treads go on, most often inside one day, and the stain is applied right there on the stairs.
/ RED OAK, WHITE OAK, HICKORY AND MAPLE
Wood Stair Treads and Risers
A tight farmhouse stair in North Granby and a broad colonial flight off Route 20 call for different wood, risers and trim, so we walk through the choices with you.
Red Oak Treads
Warm stained red oak blends with the original floors in the capes around Granby Center.
White Oak Treads
White oak reads clean and pale in a West Granby colonial that fills with morning sun.
Hickory and Maple Treads
Hickory shrugs off trail grit from the McLean Game Refuge; maple lightens a gloomy stair in a Route 20 ranch.
Painted or Wood Risers
North Granby owners split between white painted risers and oak risers stained to match the treads.
Open Stairs and Return Ends
An open-sided stair in West Granby gets return ends, so the rounded nose wraps around the exposed edge.
Landing Treads
In the houses near Salmon Brook the landing tread is set level with the second floor at the top.
/ Floors, Repairs and Stain
Hardwood Floor Services in Granby
Homeowners around Granby Center and West Granby call us after water damage to swap and stain boards, sand the oak back to life and lay fresh hardwood, vinyl plank or laminate a room at a time.
/ START YOUR PROJECT
Stairs Done in Days
Need new stairs near Granby Center or out in North Granby? Text or call 203-916-4898 and the estimator comes with tread samples, no charge.
Get your Free In-Home EstimateWhat is the price of a single new hardwood step in Granby?
$60 per step, and that covers the hardwood tread, the riser, the bull nose, stain matched to your floor and the labor. The number on the estimate is the number on the bill.
Will you pull the old carpet off our stairs?
Yes, the carpet, the pad, the tack strips and the staples all come off. The removal cost is agreed on during the free visit.
Can the treads we have just be refinished?
When the existing treads are solid oak, we hand sand and refinish them at $50 per step. Treads that are cracked or sanded thin get replaced.
Can we have oak risers instead of painted ones?
Yes. Oak risers in the same stain as the treads give an all-wood stair, while white paint gives contrast.
Do new treads get rid of the squeaks?
Almost always. Loose steps are screwed to the framing first, then each tread is glued and fastened so it cannot rub.
What happens on a stair with an open side?
Each exposed end gets a return, so the rounded nose continues around the side. The tread looks finished from every angle.
How soon can you start, and how long does the job take?
With unfinished treads the Granby crew usually begins the day after the estimate and wraps up in two days. Prefinished treads are special ordered and take a few weeks to arrive.
Is the stair work warrantied?
Yes, twelve months on the labor. The stair crew carries licenses, insurance and NWFA certification.
/ ALSO SERVING
Stair Contractors Nearby
Stair crews from the same Granby team also work in East Granby, Simsbury, Suffield, Canton and Barkhamsted, usually within a day of the estimate.
East Granby homes get a new hardwood step for $60 with riser, nose, stain and labor in.
Simsbury colonial staircases brighten with white oak stair treads.
Suffield hardwood stairs replace worn carpet with oak that wipes clean.
Canton stair contractors from our crew tighten every loose step before new oak goes on.
Barkhamsted homes with solid oak stairs get a hand refinish at $50 per step.
