.svg){kind=logo}
Walkthrough Before We Start
Hockey bags dropped at the door, salted boots from a Morris County winter and a lab that races the length of the hall. Oak with a hard finish takes the daily grind.
/ Brazil Floors of New Jersey
Hardwood Floor Installation in Mine Hill, NJ
$2.25/Sq Ft labor, nails and underlayment included. Written price before we start.
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Installation
Book online now to lock in your next-day appointment and $250 discount.
/ Hardwood Floor Installers IN MINE HILL
Hardwood Floor Installation Cost
Hardwood installation in Mine Hill starts at $2.25/Sq Ft of labor for nail down, and the nails and underlayment are in that figure. Bring in our boards and the total is $5.50/Sq Ft unfinished or $6.00 prefinished.
Nail Down Installation
Raw oak that we sand and finish on site is $5.50/Sq Ft installed, counting boards, nails and the underlayment beneath them.
$2.25
/Sq Ft
What’s Included:
Underlayment Included
Nails Supplied
Professional Installation
Nail and Glue Down
Prefinished boards arrive sealed and cost $6.00/Sq Ft installed, so the room is usable the minute the last strip is fastened.
$2.50
/Sq Ft
What’s Included:
Nails Supplied
Glue Billed Separately
Professional Installation
Floating Floor
Want a floating floor instead? Engineered hardwood is $2.00/Sq Ft for labor and suits a slab or a finished lower level.
$2.00
/Sq Ft
What’s Included:
Joint Glue Supplied
Underlayment Included
Professional Installation
.svg)
.svg)
Licensed, Insured Installation
Your order ships out of our warehouse in Long Branch, NJ, and next-day delivery from Long Branch puts the boxes at your curb, so the crew keeps moving.
.svg)
Remeasure and Material Count
Samples come to your house, and we lay oak, engineered and prefinished planks beside your baseboards so you judge the real color in your own rooms.
.svg)
One Year Install Warranty
Labor is covered for one year, and the boards carry the maker warranty. Every installer is on our payroll, and no job goes to a subcontractor.
/ FLOOR PATTERN DESIGNS
Hardwood Floor Patterns
Houses stacked up the hillside, older homes from the mining days and newer builds each sit on a different base. This is how we choose the wood for each.
Straight Lay Hardwood
Red oak fastened over leveled plywood silences the old squeaks in a cape built in the fifties.
Herringbone Hardwood
Floated engineered planks suit the lower level of a split level, where the slab runs cool and flat.
Chevron Hardwood
Steep driveways are no obstacle, because the crew walks every bundle in by hand.
Diagonal Hardwood
Boards laid over plywood in a ranch can be nail and glue at $2.50/Sq Ft plus adhesive for a firmer feel.
Checkerboard Parquet
A pale prefinished oak lifts a dim Mine Hill den that only gets afternoon light.
Basket Weave Parquet
A tough finish holds up near the mudroom where winter slush and road salt come in daily.
/ OUR SERVICES
Hardwood Installers in Mine Hill
Our crew nails oak into 1950s capes, hillside ranches and split levels around Canfield Avenue. Crooked subfloors are shimmed and screwed, felt paper rolls out, every strip is blind nailed and the shop vac runs last.
/ VINYL, REFINISHING AND STAIRS
Flooring Services in Mine Hill
Capes and split levels on the slopes off Canfield Avenue are made for solid oak, and the same crew handles vinyl, laminate, refinishing, staining, board repair and stairs.
/ START YOUR PROJECT
Hardwood Floor Installation FAQ
Planning oak for a cape off Canfield Avenue or a hillside ranch? Dial 732-851-1059 and we come out with oak samples and a free estimate at your Mine Hill address.
Get your Free In-Home EstimateHow much does hardwood installation cost in Mine Hill?
For labor, nail down is $2.25/Sq Ft, nail and glue is $2.50 with adhesive on top, and a floating engineered floor is $2.00. Add our boards and an unfinished install totals $5.50/Sq Ft, with prefinished at $6.00.
My cape near Canfield Avenue has a sloping floor. Can oak still go in?
Yes, once we shim the low areas and fasten any loose plywood. Houses on this hillside settle unevenly, so we measure the slope at the first visit.
Is hardwood fine over a basement slab?
Below grade, engineered planks on a moisture barrier are the dependable choice, with labor at $2.00/Sq Ft. Solid oak belongs on wood subfloors above ground level.
Do you tear out what is there now?
We do for about $1.00/Sq Ft and haul it off. Soft spots and squeaks are repaired before anything new is laid.
Is there a discount if I book online?
Reserve your Mine Hill visit through the website and $250 is deducted from the job. Moving the sofas and beds out of the way is a separate flat $250.
How many days should I plan on?
A few prefinished rooms go in over one or two days. Raw oak that is sanded and coated on site takes nearer a week.
Where does the wood come from?
Every order ships from our warehouse in Long Branch, NJ, and next-day delivery from Long Branch brings it to Mine Hill.
Who does the work, and what is warranted?
Our own employees do it, never subcontractors. Labor is guaranteed for one year and the boards carry the manufacturer warranty.
/ ALSO SERVING
Hardwood Floors in Nearby Towns
Our oak crews also work in Dover, Randolph, Roxbury, Wharton and Rockaway Township, with one labor rate across Morris County.
Older Dover twins and row homes take nail down oak at $2.25/Sq Ft.
Randolph colonials with big family rooms go for wide solid oak.
Roxbury ranches near the lakes often choose prefinished boards at $6.00/Sq Ft.
Compact Wharton homes ask for narrow oak with a satin sheen.
Rockaway Township split levels get engineered planks floated for $2.00/Sq Ft labor.
