Walkthrough Before We Start
Tired subfloors in the two and three family houses of Highwood and settled sills in prewar Spring Glen capes throw a floor off level, so our lead inspects the base, every threshold and the stairs before any oak comes in.
Tired subfloors in the two and three family houses of Highwood and settled sills in prewar Spring Glen capes throw a floor off level, so our lead inspects the base, every threshold and the stairs before any oak comes in.
Each installer in your Hamden home is a licensed, insured, NWFA certified Brazil Floors employee, which keeps you covered from the first row to the last.
Measuring comes first, every room with a tape, then the cartons, reducers and trim are staged by the door so the nailer never waits on material.
The labor is warrantied for one year by us, and the planks hold their manufacturer warranty, so both the workmanship and the wood are protected.

Planks run with the long wall, the fastest layout and the one that wastes least. A Centerville ranch reads longer and wider this way.

Short boards meet at 90 degrees in a zigzag, each one cut and fitted by hand. Period correct for a dining room in a Whitneyville colonial.

Boards mitered at 45 degrees so every row closes in a crisp V. Suits the open kitchens in newer Mount Carmel houses.

Diagonal planks lead the eye across the room, which makes a compact Whitneyville cape kitchen feel bigger.

Parquet blocks of oak, each square turned against its neighbor. A traditional look for a sunroom facing Sleeping Giant.

Short oak slats woven over and under, usually with a contrasting border. Classic in the older homes off Dixwell Avenue in Highwood.



Nail down hardwood runs $2.25/Sq Ft for labor, and the nails and underlayment are already in that price. When the oak comes from our Milford stock as well, you pay $5.50/Sq Ft for unfinished or $6.00/Sq Ft for prefinished, installed.
Yes, and tear-out costs about $1.00/Sq Ft. Carpet, pad and tack strips come out, loose subfloor gets screwed down, then the oak is nailed.
Engineered hardwood floated on foam with glue in the joints, since nails cannot go into concrete. Labor for that is $2.00/Sq Ft.
Yes, vinyl at $2.00/Sq Ft and laminate at $1.99/Sq Ft of labor. Waterproof vinyl is the better pick for basements along the Mill River.
Next day from the Milford warehouse, about half an hour down the road. The boards sit in the house a few days to acclimate before the crew nails them.
A new oak tread with riser, nosing and stain costs $60 per step. Existing oak stairs that only need sanding and finish are $50 per step.
The crew collects for labor on the morning they arrive, and the wood is paid as the boxes come through the door. Sanding, if any, is split half at the start and half at the last coat.
A year on our labor and the manufacturer warranty on the oak. Every installer is a licensed, insured, NWFA certified Brazil Floors employee.