.svg){kind=logo}
Walkthrough Before We Start
Hockey bags dropped in the foyer, grandchildren racing laps, a lab shaking off after a walk. Hard finished oak was made for households like that.
/ Brazil Floors of New Jersey
Hardwood Floor Installation in Cresskill, NJ
$2.25/Sq Ft labor, nails and underlayment included. Written price before we start.
We Bring the Store to Your Door — with Contractor Pricing
Free In-Home Estimates
Guaranteed Lowest Price — or We’ll Beat It
Next-Day Installation
Book online now to lock in your next-day appointment and $250 discount.
/ Fine Hardwood Installers IN CRESSKILL
Hardwood Floor Installation Cost
Cresskill clients pay $2.25/Sq Ft to have oak nailed down, with fasteners and paper underlayment inside that rate. Add boards from our stock and the completed floor is $5.50/Sq Ft raw or $6.00/Sq Ft factory finished.
Nail Down Installation
Unfinished strips, nailed over paper and sanded in the room, total $5.50/Sq Ft with the boards supplied.
$2.25
/Sq Ft
What’s Included:
Underlayment Included
Nails Supplied
Professional Installation
Nail and Glue Down
Pre-sealed boards cost $6.00/Sq Ft laid, and you are back on the floor once the last row is fastened.
$2.50
/Sq Ft
What’s Included:
Nails Supplied
Glue Billed Separately
Professional Installation
Floating Floor
Prefer a floating system for a lower level? Engineered planks go in at $2.00/Sq Ft for labor.
$2.00
/Sq Ft
What’s Included:
Joint Glue Supplied
Underlayment Included
Professional Installation
.svg)
.svg)
Licensed, Insured Installation
Your order ships out of the warehouse in Long Branch, NJ and reaches Cresskill by next-day delivery from Long Branch, so the install never stalls on a missing carton.
.svg)
Remeasure and Material Count
Samples come out of the van and onto your own subfloor, where oak, maple and wide plank engineered sit against your wall color under your actual windows.
.svg)
One Year Install Warranty
Workmanship is warranted for a year, the manufacturer backs the lumber, and every installer in your house is a Brazil Floors employee.
/ FLOOR PATTERN DESIGNS
Hardwood Floor Patterns
A stone-front Tudor, a 1950s split and a newer addition on a village lot do not share a method. Here is how we choose wood for each.
Straight Lay Hardwood
Straight strip oak runs cleanly down the long hall of a center entrance colonial.
Herringbone Hardwood
A floating wide plank handles the concrete slab under a family room addition.
Chevron Hardwood
Garage-side entries get their cartons hand carried, so lawns and plantings stay untouched.
Diagonal Hardwood
Over plywood in a 1950s split, nail and glue at $2.50/Sq Ft plus adhesive keeps boards still.
Checkerboard Parquet
A pale, brushed prefinished oak lightens a Tudor sunroom that faces north.
Basket Weave Parquet
Mudroom floors by the garage door get a harder finish, since winter salt rides in on boots.
/ OUR SERVICES
Hardwood Installers in Cresskill
We nail oak through Cresskill's Tudors, center hall colonials and mid-century splits. Sagging subfloor gets shimmed, felt goes down, each strip is blind nailed, and the shop vacuum runs before we leave.
/ VINYL, REFINISHING AND STAIRS
Flooring Services in Cresskill
Tudors, colonials and split levels off Union Avenue deserve a floor that looks planned, and one crew can also supply vinyl, laminate, sanding, color work, board repair and staircases.
/ START YOUR PROJECT
Hardwood Floor Installation FAQ
Planning new oak for a Tudor or split level near Union Avenue? Call 732-851-1059 and samples go down across your floor.
Get your Free In-Home EstimateWhat does it cost to put hardwood in a Cresskill home?
Count on $2.25/Sq Ft for nailing down oak, $2.50/Sq Ft plus glue where the floor is glued as well, and $2.00/Sq Ft to float engineered planks. Wood from our stock brings the totals to $5.50/Sq Ft unfinished and $6.00/Sq Ft prefinished.
Our colonial has original floors under carpet. Can they be salvaged?
Often they can, and we lift a corner at the estimate to find out. If the boards are sound they can be refinished instead of replaced.
Can you match the existing oak when I extend a room?
We blend new strips with the old by using the same width and species, then adjusting color through the finish. The seam rarely shows once it is sealed.
Do you remove carpet and old flooring?
We do, near $1.00/Sq Ft, and the debris is taken away in our vehicle. Subfloor squeaks are dealt with before new wood is laid.
Will you shift our furniture?
A flat $250 pays for it. Owners usually clear the small items; we take the heavy pieces.
How many days should I plan for?
Factory finished floors in two rooms take one to two days. Raw oak that is sanded and coated on site usually takes close to a week.
Is there a way to lower the cost?
Booking the estimate online saves $250, and lumber purchased through us can run as much as 30% less.
Who stands behind the work?
Our own licensed, insured, NWFA certified employees, with a year of labor warranty. The wood itself is covered by the manufacturer.
/ ALSO SERVING
Hardwood Floors in Nearby Towns
Demarest, Alpine, Tenafly, Bergenfield and Dumont sit a few minutes from Cresskill, and each gets the identical hardwood labor schedule.
Quiet Demarest colonials favor nail down red oak in a satin sheen.
Alpine estates call for long wide boards with a custom stain.
Tenafly's older homes keep period character with solid strip oak.
Bergenfield capes pick prefinished boards at $6.00/Sq Ft installed.
Dumont bungalows go with engineered planks floated for $2.00/Sq Ft labor.
