Samples on Your Own Wood
Each sample sits inside blue tape on sanded oak, so you can compare colors side by side, near the window and in shade.
Each sample sits inside blue tape on sanded oak, so you can compare colors side by side, near the window and in shade.
Sander scratches turn into dark streaks under color, so a buffer with fine screens follows and a vacuum clears the dust.
Stain is wiped onto one patch at a time and the excess pulled off before the next, so lap marks never show at the seams.
Portland staining is done by Brazil Floors employees, NWFA trained and insured, with labor warranted for twelve months.



Portland staining is $2.00/Sq Ft and includes samples on your own floor, hand applied color and a clear protective top coat. A full sanding with stain and three coats falls under our $2.50/Sq Ft refinishing.
Yes. Once Portland oak is sanded to bare wood it takes brown, walnut or chestnut cleanly, with no orange showing through.
Walnut browns and natural oak lead around Portland, with espresso, light gray and custom blends close behind.
Yes. Edgers and hand scrapers reach the corners a drum sander skips, and the stain is balanced with the floors at both ends of the stairs.
Most stains are dry by morning, and a touch test on your Portland floor comes before any clear coat so nothing lifts.
Plenty of Portland households stay home, though some spend a night away while the finish cures and the smell fades.
Often the day after we measure, and one small crew stays with the job from the first sanding pass to the final seal.
Yes. Our own NWFA trained staff stain your Portland floor, and the labor is covered for twelve months.