Samples on Your Own Wood
For homes close to Fairview Avenue, prepare the test on the wood that will receive stain so its grain and base color are visible. Use the room’s usual light.
For homes close to Fairview Avenue, prepare the test on the wood that will receive stain so its grain and base color are visible. Use the room’s usual light.
By Greenport Conservation Area, prepare the sample and final surface with the same sanding sequence so the trials compare fairly. Use the room’s usual light.
For homes close to Fairview Avenue, confirm how each species takes stain and inspect the sample for dark patches after it dries. Use the room’s usual light.
Near Fairview Avenue, keep the stain and finish details with the written workmanship terms for later reference. Save the original estimate.



View a dry trial with the intended finish in place, using the room’s normal daylight and evening light. Note the height at the joint between old flooring and an addition.
Near Fairview Avenue, yes. Prepare and finish an individual test on each species, especially when the floor includes earlier repairs.
Use a prepared sample that represents the actual wood and sanding sequence planned for the job. Check whether a framed base above a cellar needs work.
Near Fairview Avenue, compare the darker trial in the strongest light and at the room’s shaded edge before approving it.
Yes. Check the sample with the planned protective finish so you can judge the combined color and sheen. Photograph the entry near Greenport Conservation Area.
Near Fairview Avenue, prepare a trial on the tread wood and place it beside a sample of the retained landing under the same light.
Label the approved sample with the stain, finish and mixing details, then store it out of direct sunlight. Identify any retained trim in a house at the edge of Hudson.
Near Fairview Avenue, bring photos of the trim and a wood offcut if available. Note any sections that were patched in the past.