Samples on Your Own Wood
Austerlitz stain sampling should include distinct board sections. Inspect the dried color with retained trim before approval.
Austerlitz stain sampling should include distinct board sections. Inspect the dried color with retained trim before approval.
Fine-grit sanding for Austerlitz staining should suit the timber and topcoat. Inspect the sanding marks before testing the color.
Consistent sanding and a wet edge help keep stain even. Before coating rooms that share an opening, check the prepared areas.
Save Austerlitz's one-year staining workmanship coverage list with the approved sample. List coating details and care requirements.



A photo from the entrance near Route 203 can show our crew the step from a side door into the house. Apply the intended finish over a prepared trial. View the color beside trim and boards you plan to keep. Repeat the check in distinct room light.
Tell us whether the floor beneath it over a cellar in an older building is part of the proposed work near Old Austerlitz. Sample both types of boards at the opening. Check the coated results in identical lighting. Agree whether a match or a clear boundary works better.
Make a note about its edge where a patched floor meets stable boards when planning the Austerlitz visit. Select a useful location near your room entrance. Include a patch if there is one in the room. Examine the results with the woodwork that stays.
If the home is near the Columbia County hills, bring a photo that shows the daylight beside an original window. Test the shade on the tread and the nearby floor. Inspect their coated samples from both directions. Approve separate trials if the wood species differ.
At the visit near the Spencertown hamlet, discuss the existing casing in a Spencertown front room and how your rooms connect. Prepare a sample on the patch and on retained boards. Look at them side by side after the coating dries. Agree on a tone range before working across the room.
Examine the complete system on the actual floor. Look at the color and sheen after the trial dries. Document the sample approved for the job.
Review the usable wood and past coating history. Try a small prepared area before committing. Decide after seeing the proposed clear coat.
Keep a locate of the formula and wood species. Record the topcoat and retain a trial if possible. Test new wood separately if a future repair is needed.