Samples on Your Own Wood
Auburndale stain sampling should include distinct board sections. Verify the dried color with older woodwork before approval.
Auburndale stain sampling should include distinct board sections. Verify the dried color with older woodwork before approval.
Match the last sanding grit to the wood and finish system. Assess your prepared floor for scratches before applying a test patch.
Consistent sanding and a wet edge help keep stain even. Confirm the prepared areas before coating rooms that share a doorway.
Save Auburndale's one-year staining workmanship coverage mark with the approved sample. Mark coating details and care requirements.



At an address near Francis Lewis Boulevard, appearance closely at the old trim on a staircase landing. Apply the intended finish over a prepared trial. View the shade beside trim and boards that will stay. Repeat the review in different room light.
At the visit near Northern Boulevard, discuss an opening between rooms with different floor heights and how the rooms connect. Sample both types of boards at the opening. Review the coated results in identical lighting. Agree whether a match or a clear boundary works better.
A photo from the entrance near the Auburndale station area can show the crew the access point for a unit with a shared hallway. Pick a useful location near your room entrance. Include a patch if there is one in the room. Review the results with the woodwork that stays.
During your site visit near northeastern Queens, discuss light beside a street-facing window and how the rooms connect. Test the shade on the tread and the nearby floor. Examine their coated samples from both directions. Approve separate trials if the wood species differ.
Use the first room off the approach from the station as the starting point for the visit near the Auburndale LIRR station. Prepare a sample on the patch and on retained boards. Look at them beside one another after the coating dries. Agree on a tone range before working across the room.
Consider the complete system on the actual floor. Look at the shade and sheen after the trial dries. Record the sample approved for the work.
Measure the usable wood and past coating history. Try a small prepared area before committing. Decide after seeing the proposed clear coat.
Keep a determine of the formula and wood species. Record the coating and retain a trial if possible. Test new wood separately if a future repair is needed.