Boards Matched to Yours
Ask how to match the repair to the existing wood near the Route 17 corridor. For a visit near the Heritage Trail, inspect the supporting surface.
Ask how to match the repair to the existing wood near the Route 17 corridor. For a visit near the Heritage Trail, inspect the supporting surface.
Near the Heritage Trail, check for a continuing moisture source before choosing materials. Compare it with adjacent strips at the Main Street estimate.
Near the village of Chester, locate the cause of movement or gaps ahead of the estimate. Inspect the supporting surface near Sugar Loaf.
Near Sugar Loaf, ask what repair workmanship coverage includes before choosing materials. Check the floor supports when planning the layout.



Start by marking damage plank by plank. Check the support underneath where accessible and avoid ending all replacement pieces on the same line when the layout allows staggering.
Look at the depth and position of the gouge before setting the scope. A patch can work when nearby strips are firm and the base is intact.
Mark the spot with removable tape and note when the movement occurs. Send a photo showing its position relative to the doorway and walls.
Compare the cut, grain and edge profile with a sample from the original floor. Use a small finish trial to judge the color difference.
The in-home estimate is free. Show the area from several angles and explain when the damage began so the inspection can focus on likely causes.
Address the source first and have the base checked for dryness. The inspector can then determine which wood is stable enough to remain.
Show the tile profile before any wood is removed. A planned stopping point helps protect the retained surface and allows a clean join.
A local blend may work if the finish can be matched. Review the sheen after the test dries and decide whether a wider blend is needed.