Dustless Floor Refinishing
A century of boots, rocking chairs and woodstove ash dulls any finish. Sanding plus three new coats brings out the grain again.
A century of boots, rocking chairs and woodstove ash dulls any finish. Sanding plus three new coats brings out the grain again.
We choose the sheen with you, matte through satin, and stain takes well on oak, maple and heart pine. Finish products travel from our Long Branch, NJ warehouse.
Before anything is sanded we try stain on a patch of your floor, so the shade you pick is the one that dries in your Woodstown rooms.
Our refinishing is guaranteed for one year of labor. Whoever runs the sander is on our payroll and NWFA trained.

Wide old pine often needs several passes to clear varnish laid down over generations.

A medium brown stain evens out patchy wear in a parlor and warms the whole room.

Three coats of polyurethane protect a dining room from spills and heavy table legs.

Windows facing the fields bleach the boards on one side, and a fresh stain brings the color back even.

Stair landings in an older Woodstown home are sanded by hand where the machine stops short.

Plastic sheeting and vacuum hookups keep sanding dust in the work room.



Taking the floor to raw wood and finishing in three coats runs $2.50/Sq Ft. If the boards are merely dull, we buff and recoat them for $1.00/Sq Ft instead.
Our sanders pull dust into vacuum bags and doorways are sealed with plastic. A quick wipe afterward is the most you will face.
Yes, with care, since pine is soft and cuts quickly. We adjust the grit and the passes for the wood.
You can wear socks on it the next day, and furniture goes back after a few days of curing. We go over the timing before work starts.
We replace those first so the sanded floor reads even, and the repair is quoted on site.
Yes, for a flat $250.
Yes, $250 is deducted from the estimate.
One year of labor warranty from our own employees, with no subcontractors.